MTL7755AC Shunt-Diode Safety Barriers


Brief Description of 
MTL7755AC Shunt-Diode Safety Barriers

Manufacturer : MTL Instruments
Product No. : MTL7755AC
Product type : Shunt-Diode Safety Barrier
Typical Application : RTD, Grounded
Bussed Power : No
RTDs : 3-wire

Overview of MTL7755AC Shunt-Diode Safety Barriers

Analogue inputs (low-level)   MTL7755AC Shunt-Diode Safety Barriers
Thermocouples and mV sources
The recommended barrier for thermocouples and mV sources is the MTL7760ac. This 2-channel non-polarised barrier retains the ‘earthfree’ nature of the signal and, providing the receiver’s input ‘floats’, rejects common-mode ac and dc interference up to at least 7V and is unaffected by earth faults on the primary element.

AC sensors, photocells, microphones and turbine flowmeters  MTL7755AC Shunt-Diode Safety Barriers

The MTL7760ac is the recommended choice for these devices. While many of these are designated ‘simple apparatus’ and thus do not need certification, note that some ac sensors may be subject to a significant level of inductance and will therefore need to be designed and certified for hazardous-area locations.
Slidewire displacement transducers  MTL7755AC Shunt-Diode Safety Barriers
The simplest choice is the MTL7760ac. This barrier supplies power and brings back a unipolar signal.
RTDs of MTL7755AC Shunt-Diode Safety Barriers
For 3-wire RTDs, a single MTL7755ac barrier is the most economical choice. This is suitable for use with a floating bridge – the two leads from the bridge arms are protected by the barrier with the third (supply) lead being earthed through the barrier. The barrier has a low end-toend resistance of only 19Ω/channel to minimise span changes and its channels track within 0.15Ω (between –20°C and +60°C) to minimize zero shift with temperature.
If the bridge circuit is already earthed, the third barrier channel provided by an MTL7756ac is needed. For extreme accuracy, 3 channels and an earth-free bridge can be used, a configuration that cancels out the small errors due to barrier leakage.
Channels 1 and 2 (those between terminals 1 & 2 and 3 & 4 respectively) track to within 0.15Ω (between –20°C and 60°C).
4-wire constant-current circuits do not need matched barrier resistances and can be protected by two MTL7761ac barriers. If the increase in loop resistance is too great, use two MTL7755ac barriers instead.
Ordering Codes of MTL7755AC Shunt-Diode Safety Barriers
MTL7755AC Shunt-Diode Safety Barriers
Digital Input     MTL7755AC Shunt-Diode Safety Barriers
MTL4501-SR     1ch DI failsafe solid-state output + LFD alarm        
MTL4504          1ch DI relay output + LFD alarm + phase reversal
MTL4510          4ch DI solid-state output        
MTL4510B        4ch DI multifunction solid-state output
MTL4511          1ch DI relay output
MTL4513          2ch DI solid-state output        
MTL4514/B       1ch DI relay output + LFD alarm     
MTL4516          2ch DI relay output
MTL4516C        2ch DI with changeover relay output     
MTL4517          2ch DI relay output + LFD alarm     
Digital Output  MTL7755AC Shunt-Diode Safety Barriers
MTL4521          Loop powered solenoid driver
MTL4521L         Loop powered solenoid driver IIC    
MTL4523          Solenoid driver with LFD
MTL4523L         Loop powered solenoid driver + LFD       
MTL4523R         Solenoid driver with LFD
MTL4523V/VL    Solenoid/Alarm driver with voltage control    
MTL4524           Switch operated solenoid driver     
MTL4524S         Switch operated solenoid driver, 24V override       
MTL4525           Switch operated solenoid driver low power   
MTL4526           2ch switch operated relay      
Analogue Input   MTL7755AC Shunt-Diode Safety Barriers
MTL4541           1ch 2/3 wire Transmitter repeater
MTL4541A         1ch Transmitter repeater, passive input         
MTL4541AS       1ch Transmitter repeater, passive input, current sink   
MTL4544D          2/3 wire transmitter repeater, dual output   
MTL4544S          2ch 2/3 transmitter repeater, current sink    
Analogue Output  MTL7755AC Shunt-Diode Safety Barriers
MTL4546            1ch 4-20mA smart isolating driver + LFD        
MTL4546C          1ch 4-20mA smart isolating driver + oc LFD   
MTL4546Y          1ch 4-20mA smart isolating driver + oc LFD   
MTL4549            2ch 4-20mA smart isolating driver + LFD        
MTL4549C          2ch 4-20mA smart isolating driver + oc LFD   
MTL4549Y          2ch 4-20mA smart isolating driver + oc LFD   
Temperature Input   MTL7755AC Shunt-Diode Safety Barriers
MTL4575            1ch Temperature converter with alarm
MTL4576-RTD     2ch Temperature converter, RTD   
MTL4576-THC     2ch Temperature converter, THC   
MTL4581            1ch mV/THC isolator for low-level signals     
Pulse and Vibration   MTL7755AC Shunt-Diode Safety Barriers
MTL4531            1ch vibration probe interface
MTL4532            1ch pulse isolator, digital or analogue output         
MTL4533            2ch vibration probe interface
Fire and Smoke   MTL7755AC Shunt-Diode Safety Barriers
MTL4561            2ch loop-powered, for fire and smoke detectors  
General             MTL7755AC Shunt-Diode Safety Barriers
MTL4599             Dummy isolator      
MTL4599N           General purpose feed-through module

MTL4500 Series Barriers     MTL7755AC Shunt-Diode Safety Barriers

MTL7755AC Shunt-Diode Safety Barriers
MTL7755AC Shunt-Diode Safety Barriers
ICC     MTL7755AC Shunt-Diode Safety Barriers

MTL7755AC Shunt-Diode Safety Barriers
MTL7755AC Shunt-Diode Safety Barriers
MTL7755AC Shunt-Diode Safety Barriers
MTL7755AC Shunt-Diode Safety Barriers

MTL7755AC Shunt-Diode Safety Barriers
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers, Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.