Description of MTL5553 Isolator Power Supply
MTL5553 ISOLATOR/ POWER SUPPLY
The MTL5553 has been specifically developed to extend 31.25kbit/s (H1) fieldbus networks into hazardous areas. It provides power and communication to devices powered through the signal conductors. For installations in which the safe-area bus length is small an internal terminator can be enabled by a switch on top of the module.
The MTL5553 complies with requirements of Fieldbus Foundation™ specified power supply Type 133† (IS power supply).
SPECIFICATION of MTL5553 Isolator Power Supply
See also common specification
Location of fieldbus device(s)
Zone 0, IIC, T4–6 hazardous area if suitably certified
Hazardous-area fieldbus power supply
18.4V ± 2%
105Ω ±3% dc impedance
80mA maximum current
Maximum cable length
Determined by IS requirements, depending on other devices attached and maximum acceptable voltage drop along cable
Digital signal transmission
Compatible with 31.25kbit/s fieldbus systems and complies with fieldbus standards†
Supply voltage
20 to 35Vdc
LED indicator
Green: one provided for power indication
Power requirement, Vs, with 80mA output load
135mA typical at 24V
105mA at 35V
Power dissipation within unit, with 80mA output load
2.3W typical at 24V
2.6W maximum at 35V
Note: To allow adequate heat dissipation under all likely thermal conditions, it is recommended that MTL5553’s are installed on a horizontal DIN-rail mounted on a vertical surface* with a 10mm space between adjacent units. MTL MS010 10mm DIN-rail module spacers are available for this purpose.
* If an MTL5553 is mounted in a non-optimum orientation, the maximum operating temperature is reduced to 45°C.
Isolation
250V ac between safe- and hazardous-area circuits and power supply
Safety description
Terminals 1 and 2
22V, 102Ω, 216mA; Um = 250V rms or dc
MTL5553 Isolator Power Supply
MTL5011B , upgraded model: MTL5511
MTL5018 , upgraded model: MTL5516C
MTL5041 , upgraded model: MTL5541
MTL5042 , upgraded model: MTL5541
MTL5043 , upgraded model: MTL5544
MTL5044 , upgraded model: MTL5544
MTL5045 , upgraded model: MTL5546
MTL5046 , upgraded model: MTL5546
MTL5074 , upgraded model: MTL5575
MTL7787+
MTL5022 , upgraded model: MTL5522
MTL5031 , upgraded model: MTL5531 or MTL5533
Part Number & Description of MTL5553 Isolator Power Supply
Digital Input MTL5553 Isolator Power Supply
MTL4501-SR 1ch DI failsafe solid-state output + LFD alarm
MTL4504 1ch DI relay output + LFD alarm + phase reversal
MTL4510 4ch DI solid-state output
MTL4510B 4ch DI multifunction solid-state output
MTL4511 1ch DI relay output
MTL4513 2ch DI solid-state output
MTL4514/B 1ch DI relay output + LFD alarm
MTL4516 2ch DI relay output
MTL4516C 2ch DI with changeover relay output
MTL4517 2ch DI relay output + LFD alarm
Digital Output MTL5553 Isolator Power Supply
MTL4521 Loop powered solenoid driver
MTL4521L Loop powered solenoid driver IIC
MTL4523 Solenoid driver with LFD
MTL4523L Loop powered solenoid driver + LFD
MTL4523R Solenoid driver with LFD
MTL4523V/VL Solenoid/Alarm driver with voltage control
MTL4524 Switch operated solenoid driver
MTL4524S Switch operated solenoid driver, 24V override
MTL4525 Switch operated solenoid driver low power
MTL4526 2ch switch operated relay
Analogue Input MTL5553 Isolator Power Supply
MTL4541 1ch 2/3 wire Transmitter repeater
MTL4541A 1ch Transmitter repeater, passive input
MTL4541AS 1ch Transmitter repeater, passive input, current sink
MTL4544D 2/3 wire transmitter repeater, dual output
MTL4544S 2ch 2/3 transmitter repeater, current sink
Analogue Output MTL5553 Isolator Power Supply
MTL4546 1ch 4-20mA smart isolating driver + LFD
MTL4546C 1ch 4-20mA smart isolating driver + oc LFD
MTL4546Y 1ch 4-20mA smart isolating driver + oc LFD
MTL4549 2ch 4-20mA smart isolating driver + LFD
MTL4549C 2ch 4-20mA smart isolating driver + oc LFD
MTL4549Y 2ch 4-20mA smart isolating driver + oc LFD
Temperature Input MTL5553 Isolator Power Supply
MTL4575 1ch Temperature converter with alarm
MTL4576-RTD 2ch Temperature converter, RTD
MTL4576-THC 2ch Temperature converter, THC
MTL4581 1ch mV/THC isolator for low-level signals
Pulse and Vibration MTL5553 Isolator Power Supply
MTL4531 1ch vibration probe interface
MTL4532 1ch pulse isolator, digital or analogue output
MTL4533 2ch vibration probe interface
Fire and Smoke MTL5553 Isolator Power Supply
MTL4561 2ch loop-powered, for fire and smoke detectors
General MTL5553 Isolator Power Supply
MTL4599 Dummy isolator
MTL4599N General purpose feed-through module
MTL4500 Series Barriers MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply
ICC MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply
MTL5314 MTL5344 MTL5349 MTL5531-111LI MTL5531-115LI MTL5991 MPA5500
MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers,Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.