Features
* Universal Temperature Converter KFD2-UT2-Ex2
* 2-channel isolated barrier
* 24 V DC supply (Power Rail)
* Thermocouple, RTD, potentiometer or voltage input
* Usable as signal splitter (1 input and 2 outputs)
* Current output 0/4 mA … 20 mA
* Sink or source mode
* Configurable by PACTware
* Line fault (LFD) and sensor burnout detection
* Up to SIL 2 acc. to IEC 61508/IEC 61511
Technical Specification of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Product Description of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Current output 0/4 mA … 20 mA
General specifications of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Signal type Analog input
Functional safety related parameters of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Safety Integrity Level (SIL) SIL 2
Supply of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Connection terminals 14+, 15- or power feed module/Power Rail
Rated voltage 20 … 30 V DC
Ripple within the supply tolerance
Power dissipation/power consumption ≤ 1.53 W / 1.53 W
Interface of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Programming interface programming socket
Input of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Connection side field side
Connection terminals 1, 2, 3; 4, 5, 6
type Ni100 (DIN 43760)
Measuring current approx. 200 µA with RTD
Types of measuring 2-, 3-wire connection
Lead resistance max. 50 Ω per line
Measurement loop monitoring sensor breakage, sensor short-circuit
Thermocouples type B, E, J, K, N, R, S, T (IEC 584-1: 1995)
type L (DIN 43710: 1985)
type TXK, TXKH, TXA (P8.585-2001)
Cold junction compensation external and internal
Measurement loop monitoring sensor breakage
Potentiometer 0 … 20 kΩ (2-wire connection), 0.8 … 20 kΩ (3-wire connection)
Voltage selectable within the range -100 … 100 mV
Input resistance ≥ 1 MΩ (-100 … 100 mV)
Output of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Connection side control side
Connection output I: terminal 7: source (-), sink (+), terminal 8: source (+), terminal 9: sink(-)
output II: terminal 10: source (-), sink (+), terminal 11: source (+), terminal 12: sink(-)
Output I, II Analog current output
Current range 0 … 20 mA or 4 … 20 mA
Fault signal downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)
Source load 0 … 550 Ω
open-circuit voltage ≤ 18 V
Sink Voltage across terminals 5 … 30 V. If the current is supplied from a source > 16.5 V,
series resistance of ≥ (V – 16.5)/0.0215 Ω is needed, where V is the source voltage.
The maximum value of the resistance is (V – 5)/0.0215 Ω.
Transfer characteristics of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Deviation
After calibration Pt100: ± (0.06 % of measurement value in K + 0.1 % of span + 0.1 K (4-wire connection))
thermocouple: ± (0.05 % of measurement value in °C + 0.1 % of span + 1 K (1.2 K for types R and S))
this includes ± 0.8 K error of the cold junction compensation
mV: ± (50 µV + 0.1 % of span)
potentiometer: ± (0.05 % of full scale + 0.1 % of span, (excludes errors due to lead resistance))
Influence of ambient temperature deviation of CJC included:
Pt100: ± (0.0015 % of measurement value in K + 0.006 % of span)/K ΔTamb*)
thermocouple: ± (0.02 K + 0.005 % of measurement value in °C + 0.006 % of span)/K ΔTamb*)
mV: ± (0.01 % of measurement value + 0.006 % of span)/K ΔTamb*)
potentiometer: ± 0.006 % of span/K ΔTamb*)
*) ΔTamb = ambient temperature change referenced to 23 °C (296 K)
Influence of supply voltage < 0.01 % of span
Influence of load ≤ 0.001 % of output value per 100 Ω
Reaction time worst case value (sensor breakage and/or sensor short circuit detection enabled)
mV: 1.2 s, thermocouples with CJC: 1.4 s, thermocouples with fixed ref. temp: 1.4 s, 3- or 4-wire RTD: 1.1 s, 2-wire RTD: 920 ms, Potentiometer: 3-wire connection 2.8 s, 2-wire connection 2.25 s
Galvanic isolation of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Output/supply, programming input functional insulation, rated insulation voltage 50 V AC
There is no electrical isolation between the programming input and the supply.
The programming cable provides galvanic isolation so that ground loops are avoided.
Indicators/settings of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Display elements LEDs
Configuration via PACTware
Labeling space for labeling at the front
Directive conformity of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Electromagnetic compatibility NE 21:2006
Degree of protection IEC 60529:2001
Protection against electrical shock UL 61010-1:2004
Ambient conditions of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Ambient temperature -20 … 60 °C (-4 … 140 °F)
Mechanical specifications of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Degree of protection IP20
Connection screw terminals
Mass approx. 130 g
Dimensions 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
EU-type examination certificate CESI 04 ATEX 143
Marking Ex-Hexagon II (1)G [Ex ia Ga] IIC
Ex-Hexagon II (1)D [Ex ia Da] IIIC
Ex-Hexagon I (M1) [Ex ia Ma] I
Input Ex ia
Inputs terminals 1, 2, 3, 4, 5, 6 (for passive equipment)
Voltage Uo 9 V
Current Io 22 mA
Power Po 50 mW
Analog outputs, power supply, collective error
Maximum safe voltage 250 V (Attention! This is not the rated voltage.)
Interface
Maximum safe voltage 250 V (Attention! The rated voltage is lower.), RS 232
Certificate TÜV 02 ATEX 1797 X
Marking Ex-Hexagon II 3G Ex nA II T4
Galvanic isolation
Input/Other circuits safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 50303:2000
International approvals of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
UL approval
Control drawing 116-0410
CSA approval
Control drawing 116-0314 (cCSAus)
116-0347
IECEx approval
IECEx certificate IECEx TUN 07.0003
IECEx CML 16.0126X
IECEx marking [Ex ia Ga] IIC
[Ex ia Da] IIIC
[Ex ia Ma] I
Ex nA IIC T4 Gc
Similar models of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
KCD2-UT2-1
Universal Temperature Converter
1-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KCD2-UT2-Ex1
Universal Temperature Converter
1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-1
Universal Temperature Converter
1-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-2
Universal Temperature Converter
2-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Usable as signal splitter (1 input and 2 outputs), Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-Ex1
Universal Temperature Converter
1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
KFD2-UT2-Ex1-1
Universal Temperature Converter
1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V … 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-Ex2
Universal Temperature Converter
2-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Usable as signal splitter (1 input and 2 outputs), Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-Ex2-1
Universal Temperature Converter
2-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Usable as signal splitter (1 input and 2 outputs), Voltage output 0/1 V … 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-1-1
Universal Temperature Converter
1-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V … 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-2-1
Universal Temperature Converter
2-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Usable as signal splitter (1 input and 2 outputs), Voltage output 0/1 V … 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
Ordering Codes of Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
K-LB-1.6 FN-LB-I FP-LB-I FS-LB-I
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
Pepperl+Fuchs KFD2-UT2-EX2 2-Channel Universal Temperature Converters
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers, Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.