Overview of MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters

MTL4541/S – MTL5541/S
REPEATER POWER SUPPLY
4/20mA, HART®, 2- or 3-wire transmitters 
The MTLx541 provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is located in a hazardous area, and repeats the current in another floating circuit to drive a safe-area load. For HART 2-wire transmitters, the unit allows bi-directional communications signals superimposed on the 4/20mA loop current. Alternatively, the MTLx541S acts as a current sink for a safe-area connection rather than driving a current into the load.
Separately powered current sources, such as 4-wire transmitters, can be connected but will not support HART communication.

Description of MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters

Manufacturer : MTL Instruments
MTL4541
16ch AIO 4-20mA
REPEATER POWER SUPPLY
4/20mA, HART®, 2- or 3-wire transmitters
Number of channels : One
Location of transmitter : Zone 0, IIC, T4–6 hazardous area if suitably certified, Div. 1, Group A hazardous location
Safe-area output
Signal range: 4 to 20mA
Under/over-range: 0 to 24mA
Safe-area load resistance (MTLx541) : @ 24mA: 0 to 360Ω @ 20mA: 0 to 450Ω
Safe-area load (MTLx541S) : Current sink: 600Ω max.
Maximum voltage source: 24V dc
Safe-area circuit output resistance: > 1MΩ
Safe-area circuit ripple : < 50μA peak-to-peak
Hazardous-area input : Signal range: 0 to 24mA (including over-range), Transmitter voltage: 16.5V at 20mA
Transfer accuracy at 20°C : Better than 15μA
Temperature drift : < 0.8μA/°C
Response time : Settles to within 10% of final value within 50μs
Communications supported : HART (terminals 1 & 2 only)
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
LED indicator : Green: power indication
Maximum current consumption (with 20mA signal) : 51mA at 24V
Power dissipation within unit (with 20mA signal) : MTLx541 0.7W @ 24V dc, MTLx541S 1.0W @ 24V dc
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
Safety description
Terminals 2 to 1 and 3: Uo=28V Io=93mA Po=651mW Um = 253V rms or dc
Terminals 1 to 3: Simple apparatus ≤1.5V, ≤0.1A and ≤25mW; can be connected without further certification into any IS loop with an open-circuit voltage <28V
Technical Data of MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
See also common specification
Number of channels
One
Location of transmitter
Zone 0, IIC, T4–6 hazardous area if suitably certified
Div. 1, Group A hazardous location
Safe-area output
Signal range: 4 to 20mA
Under/over-range: 0 to 24mA
Safe-area load resistance (MTLx541)
@ 24mA: 0 to 360Ω
@ 20mA: 0 to 450Ω
Safe-area load (MTLx541S)
Current sink: 600Ω max.
Maximum voltage source: 24V dc
Safe-area circuit output resistance: > 1MΩ
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
Safe-area circuit ripple
< 50μA peak-to-peak
Hazardous-area input
Signal range: 0 to 24mA (including over-range)
Transmitter voltage: 16.5V at 20mA
Transfer accuracy at 20°C
Better than 15μA
Temperature drift
< 0.8μA/°C
Response time
Settles to within 10% of final value within 50μs
Communications supported
HART (terminals 1 & 2 only)

MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters

LED indicator
Green: power indication
Maximum current consumption (with 20mA signal)
51mA at 24V
Power dissipation within unit (with 20mA signal)
MTLx541 0.7W @ 24V dc
MTLx541S 1.0W @ 24V dc
Terminals 2 to 1 and 3:
Uo=28V Io=93mA Po=651mW Um = 253V rms or dc
Terminals 1 to 3:
Simple apparatus ≤1.5V, ≤0.1A and ≤25mW; can be connected
without further certification into any IS loop with an open-circuit
voltage <28V
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters

SIL capable
These models have been assessed for use in
IEC 61508 functional safety applications.
See data on MTL web site and refer to the
safety manual
MTL7700 series
Product Description
MTL7706+ Shunt-Diode Safety Barrier
MTL7707+ Shunt-Diode Safety Barrier
MTL7707P+ Shunt-Diode Safety Barrier
MTL7710+ Shunt-Diode Safety Barrier
MTL7715+ Shunt-Diode Safety Barrier
MTL7715P+ Shunt-Diode Safety Barrier
MTL7722+ Shunt-Diode Safety Barrier
MTL7728+ Shunt-Diode Safety Barrier
MTL7728- Shunt-Diode Safety Barrier
MTL7728ac Shunt-Diode Safety Barrier
MTL7728P+ Shunt-Diode Safety Barrier
MTL7729P+ Shunt-Diode Safety Barrier
MTL7741 Shunt-Diode Safety Barrier
MTL7742 Shunt-Diode Safety Barrier
MTL7743 Shunt-Diode Safety Barrier
MTL7744 Shunt-Diode Safety Barrier
MTL7745 Shunt-Diode Safety Barrier
MTL7755ac Shunt-Diode Safety Barrier
MTL7756ac Shunt-Diode Safety Barrier
MTL7758+ Shunt-Diode Safety Barrier
MTL7758- Shunt-Diode Safety Barrier
MTL7760ac Shunt-Diode Safety Barrier
MTL7761ac Shunt-Diode Safety Barrier
MTL7761Pac Shunt-Diode Safety Barrier
MTL7764+ Shunt-Diode Safety Barrier
MTL7764ac Shunt-Diode Safety Barrier
MTL7765ac Shunt-Diode Safety Barrier
MTL7766ac Shunt-Diode Safety Barrier
MTL7766Pac Shunt-Diode Safety Barrier
MTL7767+ Shunt-Diode Safety Barrier
MTL7778ac Shunt-Diode Safety Barrier
MTL7779+ Shunt-Diode Safety Barrier
MTL7787+ Shunt-Diode Safety Barrier
MTL7787P+ Shunt-Diode Safety Barrier
MTL7788+ Shunt-Diode Safety Barrier
MTL7788R+ Shunt-Diode Safety Barrier
MTL7789+ Shunt-Diode Safety Barrier
MTL7796+ Shunt-Diode Safety Barrier
MTL7796– Shunt-Diode Safety Barrier
MTL7798 Power Feed Module
MTL7799 Dummy Barrier
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
ICC     MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters
MTL4541 MTL5541 Repeaters Power Supply 4-20mA 2 or 3 Wire Transmitters