MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers

Description of MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers

ANALOGUE INPUTS (HIGH LEVEL)

2-wire transmitters, 4/20mA, conventional and smart
The recommended barrier for use with ‘conventional’ and ‘smart’4/20mA transmitters (fed by a 26V regulated supply) is the MTL7787+.
This provides up to 12.9V (14.6V for MTL7787P+) at Vwkg and 20mA for a transmitter and its lines as well as 5V for the typical 250Ω load.
This application and this barrier is suitable for use with the optional power bus facility.
The MTL7706+ is recommended for applications where an unregulated supply of up to 35V is used. It provides 16.0V for conventional and Smart transmitters at 20mA, as well as 5V for a typical 250Ω load.
With the MTL7706+ terminal 3 is negative with respect to earth, so the connections to terminals 3 and 4 should be reversed.
ANALOGUE OUTPUTS
Controller outputs (I/P converters)
The single-channel MTL7728+ with a voltage drop of 6.66V at 20mA is the recommended choice for most controller outputs. Higher-power versions are available: the MTL7728P+ (5.1V drop) is suitable for IIC applications; the MTL7729P+ (3.68V drop) for IIB applications.
MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
For controllers with an output circuit separated from the 0V rail by the control transistor, the 2-channel MTL7787+ is the preferred choice as the return channel can handle up to 26.6V allowing the control signal to be turned off completely. The voltage drop is 8.1V at 20mA. A higherpower version of the latter, the MTL7787P+, is also available. The return channel of these barriers handle up to 26.4V and the maximum voltage drop is only 6.38V.
The MTL7787+ and MTL7787P+ are also suitable for controllers containing a resistor which enables the return current to be monitored for high-integrity operation.
Similar Models of MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
Module No. Bussed
Power  MTL7000
Equivalent MTL7000
ATEX
Certificate
Number(s) MTL700
equivalent MTL700
ATEX
Certificate
Number(s) Typical
Application
MTL7710+ No  Half of
MTL7162+ BAS99ATEX7285  MTL710+  BAS01ATEX7202  4/6V Systems
MTL7715+ No  N/A N/A  MTL715+  BAS01ATEX7202  12V Systems
MTL7715P+ No  N/A N/A  MTL715P+  BAS01ATEX7202  12V Systems
MTL7758+/- No  N/A  N/A  MTL758  BAS01ATEX7217  Active sensors, 
MTL7760ac No  N/A  N/A  MTL760ac  BAS01ATEX7202  Active sensors,
Thermocouples
Gauges
MTL7765ac No   N/A N/A  MTL765ac  BAS01ATEX7202  General Purpose
MTL7766ac No  N/A N/A  MTL766ac  BAS01ATEX7202  Strain Gauges
MTL7766Pac No   MTL7066Pac
MTL7788R+ Yes N/A N/A  MTL788R+  BAS01ATEX7202  1—5V systems
MTL7796+/- No MTL7096-
MTL7196- BAS99ATEX7285 MTL796+/-  BAS01ATEX7202  Vibration sensors

Similar Models of MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers


MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers

TO ORDER SPECIFY of MTL TP48-I-NDI Surge Protection Devices TP48-I-NDI Surge Protectors
TP48-N Non-certified SPD – 1/2” NPT thread
TP48-I Non-certified SPD – 20mm ISO thread
TP48-G Non-certified SPD – G 1/2” (BSP 1/2 inch)
TP48-3-N Non-certified SPD – 1/2” NPT thread
TP48-3-I Non-certified SPD – 20mm ISO thread
TP48-3-G Non-certified SPD – G 1/2” BSP 1/2 inch
TP48-4-N Non-certified SPD – 1/2” NPT thread
TP48-4-I Non-certified SPD – 20mm ISO thread
TP48-4-G Non-certified SPD – G 1/2” BSP 1/2 inch
TP48-N-NDI Certified SPD – 1/2” NPT thread
TP48-I-NDI Certified SPD – 20mm ISO thread
TP48-G-NDI Certified SPD – G 1/2” (BSP 1/2 inch)
TP48-3-N-NDI Certified SPD – 1/2” NPT thread
TP48-3-I-NDI Certified SPD – 20mm ISO thread
TP48-3-G-NDI Certified SPD – 20mm ISO thread
TP48-4-N-NDI Certified SPD – 1/2” NPT thread
TP48-4-I-NDI Certified SPD – 20mm ISO thread
TP48-4-G-NDI Certified SPD – G 1/2” – BSP 1/2 inch
MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
TP24/7-N-NDI Certified process transmitter surge protection device – 1/2” NPT thread
TP24/7-I-NDI Certified process transmitter surge protection device – 20mm ISO thread
TP24/7-G-NDI Certified process transmitter surge protection device – G 1/2” (BSP 1/2”)
TP24/7-N Non-certified process transmitter surge protection device – 1/2” NPT thread
TP24/7-I Non-certified process transmitter surge protection device – 20mm ISO thread
TP24/7-G
TP24/7 All
TP24/7-X-NDI
TP24/7-T-XNDI

MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
TP-ACFF-N AC power & Foundation Fieldbus 1/2” NPT Thread 
TP-ACFF-I AC power & Foundation Fieldbus 20mm ISO Thread
TP-AC420-N AC power & 4-20mA 1/2” NPT Thread 
TP-AC420-I AC power & 4-20mA 20mm ISO Thread
TP-AC485-N AC power & Profibus DP (RS485) 1/2” NPT Thread 
TP-AC485-I AC power & Profibus DP (RS485) 20mm ISO Thread

TP-P32-N-NDI Certified process transmitter surge protection device – 1/2” NPT thread
TP-P32-I-NDI Certified process transmitter surge protection device – 20mm ISO thread
TP-P32-G-NDI Certified process transmitter surge protection device – G 1/2” (BSP 1/2″)
TP-P32-N Non-certified process transmitter surge protection device – 1/2” NPT thread
TP-P32-I Non-certified process transmitter surge protection device – 20mm ISO thread
TP-P32-G Non-certified process transmitter surge protection device – G 1/2” (BSP 1/2″)

TP-P48-N-NDI Certified process transmitter surge protection device – 1/2” NPT thread
TP-P48-I-NDI Certified process transmitter surge protection device – 20mm ISO thread
TP-P48-G-NDI Certified process transmitter surge protection device – G 1/2” (BSP 1/2″)
TP-P48-N Non-certified process transmitter surge protection device – 1/2” NPT thread
TP-P48-I Non-certified process transmitter surge protection device – 20mm ISO thread
TP-P48-G Non-certified process transmitter surge protection device – G 1/2” (BSP 1/2″)
TS10-P 10 pair protection for PSTN applications
TS10-I 10 pair protection for ISDN or private wire applications
Transmitters
MTL831B Analogue transmitter
Receivers
MTL838B-MBF Analogue receiver, RS485 and/or RS422 outputs for Modbus®
Analogue receiver accessories
PCS83 PC software configuration package
Process controller interface software
Contact Eaton’s MTL product line for details of software for interfacing with proprietary process controllers
Isolating interface units and earth leakage detectors
MTL3052 Digital isolator interface unit
MTL4220 Earth leakage detector

Enclosures
ENC8 General-purpose enclosure
ENC8SS General-purpose enclosure (stainless steel)
Mounting accessories
ISP7000 Insulating spacer
THR2 Standard DIN rail, 35mm x 7.5mm
THR7000 T-section DIN rail, specially nickel plated,
35mm x 7.5mm, 1m length
Earthing/earth rail accessories
ETL7000 Earth terminal, DIN rail mounted
IMB57 Insulated mounting block (two needed)
ERB57S Earth rail bracket, straight
ERB57O Earth rail bracket, offset
ERL7 Earth rail, 1m length
ETM7 Earth terminal, pack of 50
Tagging accessories
TAG57 Tagging strip, 1m length
TGL57 Tagging strip labels, set of 10 x 0.5m
BRI7000 Barrier identifier
BIL7000 Barrier identification labels, sheet of 120
BIL7000L Barrier identification labels, A4 sheet of 126

MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers

Enclosures

DX070 Enclosure for up to 9 x SD range SPDs
DX170 Enclosure for up to 22 x SD range SPDs
Accessories (replacement)
SD-F25 Replaceable fuse pack – 250mA standard(available in packs of 5)
RFA7050 Replaceable fuse pack – 50mA special(available in packs of 5)
RLA7000 Solid Link (available in packs of 5)
MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
MTL4113P Failsafe Proximity Detector input with LFD Baseefa certification to IEC61508 pending
MTL5113P Failsafe Proximity Detector input with LFD Baseefa certification to IEC61508 pending
MTL4043 Current Repeater – Current sinking Eutech assessed to IEC61508
(smart transmitters)
MTL4041B-SR Current Repeater (smart transmitters) BASEEFA certified to IEC61508
MTL4041P-SR Current Repeater – high power BASEEFA certified to IEC61508
(smart transmitters)
MTL4024-SR Solenoid / alarm driver BASEEFA certified to IEC61508
MTL4061-SR Fire & Smoke detector interface BASEEFA certified to IEC61508
MTL5021-SR Solenoid / alarm driver BASEEFA certified to IEC61508
MTL5022-SR Solenoid / alarm driver IIB gases BASEEFA certified to IEC61508
MTL5025-SR Solenoid / alarm driver low power BASEEFA certified to IEC61508
MTL5042-SR Current Repeater (smart transmitters) BASEEFA certified to IEC61508
MTL5061-SR Fire & Smoke detector interface BASEEFA certified to IEC61508
MTL4841/2 HART Multiplexers BASEEFA certified to IEC61508
E02011 Current Repeater Assessment to DIN 19250

MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
MLDT28500 MTL data surge tester
MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
ICC    MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers



MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers

MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers
MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers

MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers

MTL3046B,discontinued,replaced by:MTL5541
MTL3042,discontinued,replaced by:MTL5546Y
MTL5053,discontinued,replaced by:MTL5553
MTL5995,discontinued,replaced by:F101-PS
MTL3000 SERIES (200mA)
MTL4041A,discontinued,replaced by:MTL4541A
MTL4041B,discontinued,replaced by:4541B
MTL5042,discontinued,replaced by:MTL5541
MTL5061,discontinued,replaced by:MTL5561
MTL4842,discontinued,replaced by:MTL4852

MTL7787+ MTL7787P+ Intrinsically Shunt Diode Safety Barriers

We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers,Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.