Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Product Features of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Repeater KFD0-CS-Ex2.50P
2-channel isolated barrier
24 V DC supply (loop powered)
Current input/output 4 mA … 20 mA
transmitter power supply
Accuracy 0.1 %
Reverse polarity protection
SIL 2 (SC 3) acc. to IEC/EN 61508
Technical Specification of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
General specifications of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Signal type Analog input/analog output
Functional safety related parameters of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Safety Integrity Level (SIL) SIL 2
Systematic capability (SC) SC 3
Supply of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Rated voltage loop powered
Control circuit
Connection terminals 12-, 11+; 8-, 10-, 9+
Voltage 5 … 35 V DC
Current 4 … 20 mA
Power dissipation at 20 mA and Uin < 24.3 V: < 250 mW per channel
at 20 mA and Uin > 24.3 V: < 500 mW per channel
Field circuit of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Connection terminals 1+, 2-; 4+, 5-
Voltage for 5V < Uin < 24.3V: ≥ 0.9 x Uin – (0.37 x current in mA) – 1.0
for Uin > 24.3 V: ≥ 21 V – (0.36 x current in mA)
Short-circuit current at Uin > 24.3 V : ≤ 65 mA
Transfer current ≤ 40 mA
Transfer characteristics of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Accuracy 0.1 %
Deviation
After calibration ≤ ± 20 µA; incl. calibration, linearity, hysteresis and load fluctuations at the field side up to a load of 1 kΩ at 20 °C (68 °F)
Influence of ambient temperature ≤ ± 2 µA/K at Uin ≤ 20 V; ≤ ± 5 µA/K at Uin > 20 V
Rise time ≤ 5 ms at bounce from 4 … 20 mA and Uin < 24 V
Galvanic isolation of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Field circuit/control circuit safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Indicators/settings
Labeling space for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Electromagnetic compatibility NE 21:2012
EN 61326-3-2:2008
Degree of protection IEC 60529:2001
Protection against electrical shock UL 61010-1:2012
Ambient conditions of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Ambient temperature -20 … 60 °C (-4 … 140 °F)
Mechanical specifications of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Degree of protection IP20
Connection screw terminals
Mass approx. 100 g
Dimensions 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
EU-type examination certificate BAS 98 ATEX 7343 X
Marking Ex-Hexagon II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I (-20 °C ≤ Tamb ≤ 60 °C)
Voltage 25.2 V
Current 93 mA
Power 585 mW
Control circuit
Maximum safe voltage 250 V eff (Attention! The rated voltage can be lower.)
Field circuit
Maximum safe voltage 250 V eff (Attention! The rated voltage can be lower.)
Certificate TÜV 99 ATEX 1499 X
Marking Ex-Hexagon II 3G Ex nA II T4 [device in zone 2]
Galvanic isolation
Field circuit/control circuit safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
FM approval
Control drawing 116-0437
UL approval
Control drawing 116-0438 (cULus)
IECEx approval
IECEx certificate IECEx BAS 05.0004X
IECEx CML 19.0040X
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Ex ec IIC T4 Gc
General information
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Classifications of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
System Classcode
ECLASS 11.0 27210120
ECLASS 10.0.1 27210120
ECLASS 9.0 27210120
ECLASS 8.0 27210120
ECLASS 5.1 27210120
ETIM 8.0 EC002653
ETIM 7.0 EC002653
ETIM 6.0 EC002653
ETIM 5.0 EC001485
UNSPSC 12.1 32101514
Similar Models of Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
KCD2-RR2-Ex1
Resistance Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Resistance and RTD input (Pt100, Pt500, Pt1000), Resistance output, Accuracy 0.1 %, Line fault detection (LFD) for Pt100, Housing width 12.5 mm, SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Transfer direction: to the control system, Safety Integrity Level (SIL): SIL 2, Rated voltage: 19 … 30 V DC, Field device: resistance thermometer, Signal: Resistance, Line fault detection
KFD0-CS-Ex1.51P
Current Driver/Repeater
1-channel isolated barrier, 24 V DC supply (loop powered), Current input/output 0 mA … 40 mA, I/P or transmitter power supply, Accuracy 1 %, Reverse polarity protection, SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the field / to the control system, Reverse polarity protection, Safety Integrity Level (SIL): SIL 2, Rated voltage: loop powered, Signal: 1 x 0 … 40 mA, Device: 1 x fire alarm, Signal: 1 x 0 … 40 mA
KFD0-CS-Ex1.54
Repeater
1-channel isolated barrier, 24 V DC supply (loop powered), SMART fire alarm input, Current input 1 mA … 20 mA, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, HART communication, Safety Integrity Level (SIL): SIL 3, Rated voltage: loop powered, Signal: 1 x 1 … 20 mA, Signal [2]: 1 x HART, Device: 1 x fire alarm, Signal: 1 x 1 … 20 mA
KFD0-CS-Ex2.52
Repeater
2-channel isolated barrier, 24 V DC supply (loop powered), Current input/output 4 mA … 20 mA, Accuracy 0.1 %, Entity parameter Io/Isc = 0 mA, Housing width: 20 mm, Number of channels: 2-channel, Transfer direction: to the control system, Rated voltage: loop powered, Signal: 2 x 4 … 20 mA, Signal: 2 x 4 … 20 mA
KFD0-SCS-Ex1.55
SMART Current Driver/Repeater
1-channel isolated barrier, 24 V DC supply (loop powered), Current input/output 4 mA … 20 mA, HART I/P or transmitter power supply, Low voltage drop, Line fault detection (LFD), Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the field / to the control system, HART communication, Safety Integrity Level (SIL): SIL 2, Rated voltage: loop powered, Signal: 1 x 4 … 20 mA, Signal [2]: 1 x HART, Signal: 1 x 4 … 20 mA, Line fault detection
KFD2-VR-Ex1.18
Voltage Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 V … 12 V, Voltage output 0 V … 12 V, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Rated voltage: 20 … 35 V DC, Signal: 1 x 0 … 12 V, Signal: 1 x 0 … 12 V, Cut-off frequency: 1.2 kHz (-3 dB)
KFD2-VR-Ex1.19
Voltage Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input -10 V … 10 V, Voltage output -10 V … 10 V, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Rated voltage: 20 … 35 V DC, Signal: 1 x -10 … 10 V, Signal: 1 x -10 … 10 V, Cut-off frequency: 1.2 kHz (-3 dB)
KFD2-VR2-Ex1.50M
Voltage Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 mV … ± 50 mV, Voltage output 0 mV … ± 50 mV, Selectable up/downscale sensor breakage detection, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Rated voltage: 19 … 30 V DC, Signal: 1 x -50 … 50 mV, Signal: 1 x -50 … 50 mV, Cut-off frequency: 350 Hz (-3 dB)
KFD2-VR4-Ex1.26
Voltage Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 V … -20 V, Vibration sensor inputs, Voltage/current field supply, Voltage output 0 V … -20 V, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Safety Integrity Level (SIL): SIL 2, Rated voltage: 19 … 30 V DC, Signal: 1 x -20 … 0 V, Signal: 1 x -20 … 0 V, Cut-off frequency: 10 kHz (-0,1 dB)
20 kHz (-1 dB)
KFD0-CS-Ex1.50P
Repeater
1-channel isolated barrier, 24 V DC supply (loop powered), Current input/output 4 mA … 20 mA, transmitter power supply, Accuracy 0.1 %, Reverse polarity protection, SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the field / to the control system, Reverse polarity protection, Safety Integrity Level (SIL): SIL 2, Rated voltage: loop powered, Signal: 1 x 4 … 20 mA, Device: 1 x fire alarm, Signal: 1 x 4 … 20 mA
KFD0-CS-Ex1.54-Y2
Repeater
1-channel isolated barrier, 24 V DC supply (loop powered), SMART fire alarm input, Current input 1 mA … 20 mA, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, HART communication, Rated voltage: loop powered, Signal: 1 x 1 … 20 mA, Signal [2]: 1 x HART, Device: 1 x fire alarm, Signal: 1 x 1 … 20 mA
KFD0-CS-Ex2.50P
Repeater
2-channel isolated barrier, 24 V DC supply (loop powered), Current input/output 4 mA … 20 mA, transmitter power supply, Accuracy 0.1 %, Reverse polarity protection, SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 2-channel, Transfer direction: to the field / to the control system, Reverse polarity protection, Safety Integrity Level (SIL): SIL 2, Rated voltage: loop powered, Signal: 2 x 4 … 20 mA, Device: 2 x fire alarm, Signal: 2 x 4 … 20 mA
KFD0-CS-Ex2.51P
Current Driver/Repeater
2-channel isolated barrier, 24 V DC supply (loop powered), Current input/output 0 mA … 40 mA, I/P or transmitter power supply, Accuracy 1 %, Reverse polarity protection, SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 2-channel, Transfer direction: to the field / to the control system, Reverse polarity protection, Safety Integrity Level (SIL): SIL 2, Rated voltage: loop powered, Signal: 2 x 0 … 40 mA, Device: 2 x fire alarm, Signal: 2 x 0 … 40 mA
KFD0-CS-Ex2.54
Repeater
2-channel isolated barrier, 24 V DC supply (loop powered), SMART fire alarm input, Current input 1 mA … 20 mA, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 2-channel, Transfer direction: to the control system, HART communication, Safety Integrity Level (SIL): SIL 3, Rated voltage: loop powered, Signal: 2 x 1 … 20 mA, Signal [2]: 2 x HART, Device: 2 x fire alarm, Signal: 2 x 1 … 20 mA
KCD2-RR2-Ex1.SP
Resistance Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Resistance and RTD input (Pt100, Pt500, Pt1000), Resistance output, Accuracy 0.1 %, Line fault detection (LFD) for Pt100, Housing width 12.5 mm, Connection via spring terminals with push-in connection technology, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Transfer direction: to the control system, Safety Integrity Level (SIL): SIL 2, Rated voltage: 19 … 30 V DC, Field device: resistance thermometer
KFD0-CS-Ex1.52
Repeater
1-channel isolated barrier, 24 V DC supply (loop powered), Current input/output 4 mA … 20 mA, Accuracy 0.1 %, Entity parameter Io/Isc = 0 mA, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Rated voltage: loop powered, Signal: 1 x 4 … 20 mA, Signal: 1 x 4 … 20 mA
KFD2-VR-Ex1.12
Voltage Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 V … 9 V, Voltage output 0 V … 9 V, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Rated voltage: 20 … 35 V DC, Signal: 1 x 0 … 9 V, Signal: 1 x 0 … 9 V, Cut-off frequency: 1.2 kHz (-3 dB)
KFD2-VR-Ex1.19-Y109129
Voltage Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input -10 V … 10 V, Transmission frequency up to 50 kHz, Voltage output -10 V … 10 V, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Rated voltage: 20 … 35 V DC, Signal: 1 x -10 … 10 V, Signal: 1 x -10 … 10 V, Cut-off frequency: 50 kHz (-3 dB)
KFD2-VR2-Ex1.500M
Voltage Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 mV … ± 500 mV, Voltage output 0 mV … ± 500 mV, Selectable up/downscale sensor breakage detection, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Rated voltage: 19 … 30 V DC, Signal: 1 x -500 … 500 mV, Signal: 1 x -500 … 500 mV, Cut-off frequency: 350 Hz (-3 dB)
KFD2-FF-Ex2.RS232
RS 232 Repeater
1-channel isolated barrier, 24 V DC supply (Power Rail), RS 232 input/output, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Rated voltage: 19 … 30 V DC, Interface: RS 232, Interface: RS 232
Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters
Pepperl+Fuchs KFD0-CS-Ex2.50P Repeaters