Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Features

SMART Transmitter Power Supply KFD2-STC5-1.2O
1-channel signal conditioner
24 V DC supply (Power Rail)
Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources
Signal splitter (1 input and 2 outputs)
Dual output 0/4 mA … 20 mA, current sink/current source
Terminals with test points
Up to SIL 3 acc. to IEC 61508

Technical data of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

General specifications
Signal type Analog input

Functional safety related parameters of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Safety Integrity Level (SIL) SIL 3
Systematic capability (SC) SC 3

Supply of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Connection Power Rail or terminals 14+, 15-
Rated voltage 18 … 30 V DC
Ripple within the supply tolerance
Power dissipation ≤ 1 W at maximum load
Power consumption ≤ 1.7 W at maximum load

Input of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Connection side field side
Connection terminals 1+, 2-, 3
Input signal 0/4 … 20 mA
Open circuit voltage/short-circuit current terminals 1+, 3: 23 V / 25 mA
Input resistance max. 265 Ω terminals 2-, 3 , max. 330 Ω terminals 1+, 3
Available voltage ≥ 16 V at 20 mA ; ≥ 20 V at 4 mA , terminals 1+, 3

Output of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Connection side control side
Connection terminals 7+, 8-, 9-; 10+, 11-, 12- (sink)
terminals 7-, 8+, 9+; 10-, 11+, 12+ (source)
see additional information
Load 0 … 600 Ω
Output signal 0/4 … 20 mA (overload > 25 mA)
Ripple max. 50 µA eff
External supply (loop) 2 … 30 V DC

Transfer characteristics of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Deviation at 20 °C (68 °F), 0/4 … 20 mA
≤ ± 10 µA incl. calibration, linearity, hysteresis, loads and supply voltage fluctuations
Influence of ambient temperature ≤ 0.25 µA/K
Frequency range input in output: bandwidth with 1 mApp signal 0 … 7.5 kHz (-3 dB)
output in input: band width with 1 Vss signal 0.3 … 7.5 kHz (-3 dB)
Settling time 200 µs
Rise time/fall time 100 µs

Galvanic isolation of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Input/Output basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff
Input/power supply basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff
Output/power supply functional insulation, rated insulation voltage 50 V AC
Output/Output functional insulation, rated insulation voltage 50 V AC

Indicators/settings of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Display elements LED
Labeling space for labeling at the front

Directive conformity of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)

Conformity of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Electromagnetic compatibility NE 21:2012
EN 61326-3-2:2008
Degree of protection IEC 60529:2001
Protection against electrical shock UL 61010-1:2012

Ambient conditions of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Ambient temperature -20 … 60 °C (-4 … 140 °F)
extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions

Mechanical specifications of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Degree of protection IP20
Connection screw terminals
Mass approx. 150 g
Dimensions 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , housing type B2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001

General information of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications of Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply

System Classcode
ECLASS 11.0 27210119
ECLASS 10.0.1 27210119
ECLASS 9.0 27210119
ECLASS 8.0 27210119
ECLASS 5.1 27210119
ETIM 8.0 EC001485
ETIM 7.0 EC001485
ETIM 6.0 EC001485
ETIM 5.0 EC001485
UNSPSC 12.1 32101514

Pepperl+Fuchs KFD2-STC5-1.2O SMART Transmitter Power Supply