Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier 

Description of Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

MCAR-02 Mounting Carrier (36 inch)
The MCAR-02 is a carrier that can be screwed on any flat surface.
The MCAR-02 can carry two IOTA-R24 assemblies. The below figure shows the physical appearance and the coordinates of the four mounting holes.

Features Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

The MCAR-02 consists of:
l A Cable Carrier Assembly (CCA)
l A metal profile
l Two plastic cover plates
l A ground rail with 32 ground connection screws
l Two power rails with M5 holes (+24V and 0V)
l Four mounting holes (use screws with a diameter <5.5 mm)

The power rails of two MCAR-02 carriers can be coupled. Use two M5 screws to connect the two power rials of the top carrier with the bottom carrier (through the 5 mm holes).

Mounting an IOTA-R24      Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

An IOTA-R24 is fixed on the MCAR-02 with ten ground screws and two power screws (24V and COM).
24Vdc power must be connected to the MCAR-02 on the power rails using M5 screws

 Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

 Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

 Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

 Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

 Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

 Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

 Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier

 Honeywell FC-MCAR-02 SM RIO 36 Inch Mounting Carrier