Description 

A2EN402-S0000

Model A2EN402 N-ESB Bus Coupler Module (for N-IO, 2-Port)

Suffix Codes

0 Always 0

   0 Always 0

       0 With no explosion protection

             0 Basic type

STANDARD SPECIFICATIONS

 N-ESB Bus Interface

Connection: A2EN402 and A2EN404 have two and four N-ESB bus communication ports, respectively, on the

 front of the modules. A pair of A2EN40 installed in an odd-numbered slot and even-numbered slot

 of A2FV50 or A2FV70 shall be connected to N-ESB bus 1 and bus 2, respectively.

Transmission cable: Unshielded twist-pair (UTP) with enhanced category 5 or superior

Connector: RJ-45 connector (ISO/IEC8877-compliant)

Transmission speed: 100 Mbps

Transmission distance: Max. 100 m (between a FCU and a N-IO node, or between N-IO nodes)

When using A2EN40 with A2FV50, for details of N-ESB bus specifications, refer to the GS “N-IO System

Overview” (GS 33J62A10-01EN).

When using A2EN40 with A2FV70, for details of N-ESB bus specifications, refer to the GS “Field Control Unit,

Cabinet Utility Kit (for RIO System Upgrade)” (GS 33J64E10-01EN).

 Installation Limitations

A pair of A2EN40 shall be installed in A2FV50 or A2FV70 and always be used in a dual-redundant configuration.

For the installation limitations for A2FV50, refer to the GS “A2FV50 Field Control Unit” (GS 33J62E10-01EN).

For the installation limitations for A2FV70, refer to the GS “Field Control Unit, Cabinet Utility Kit (for RIO System

Upgrade)” (GS 33J64E10-01EN).

 Current Consumption

0.5 A

 Weight

A2EN402: Approx. 0.22 kg

A2EN404: Approx. 0.22 kg

We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers, Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.