Description
A2FV50D-A412000
Model A2FV50D Duplexed Field Control Unit (for N-IO, 19-inch Rack Mountable)
Suffix Codes
-A Standard type (for CP471) (*1)
4 Dual-redundant Vnet/IP, dual-redundant power supply
1 Always 1
2 220 – 240 V AC power supply (*4)
0 With no explosion protection
0 Basic type
0 Always 0
Duplexed Field Control Unit
Model A2FV50D Duplexed Field Control Unit (for N-IO, 19-inch Rack Mountable)
Suffix
Codes
-A Standard type (for CP471) (*1)
-S Standard type (for CP461) (*3)
4 Dual-redundant Vnet/IP, dual-redundant power supply
1 Always 1
1 100 – 120 V AC power supply (*4)
2 220 – 240 V AC power supply (*4)
4 24 V DC power supply (*4)
0 With no explosion protection
1 With explosion protection
0 Basic type
1 With ISA Standard G3 option
0 Always 0
Option
Code
/ATDOC Explosion Protection Manual (*5)
/MRN With Marine Standards (*2)
*1: CP471 operates with CENTUM VP R6.01 or later version of Control Function for Field Control Station. Be sure to apply the
software patch for supporting CP471 for CENTUM VP R6.01, R6.02, R6.03, and R6.04. CP471 can be combined with the
style code S3 or later of ESB bus coupler module EC401. See GS 33J60E30-01EN.
*2: Select the option code “/MRN” if A2FV50 with marine standards is required.
*3: Unavailable for ordering A2FV50D with CP461 due to the supply ends on October 19, 2019. Existing CP461 can be
replaced with CP471. Replacement from CP461 to CP471 is prohibited to perform by a user.
This replacement must be done by the service engineer authorized by Yokogawa Electric Corporation. CP471 can be
combined with the style code S3 or later of ESB bus coupler module EC401. See GS 33J60E30-01EN.
*4: To meet the safety standards and EMC standards, the unit must be installed in a keyed metallic cabinet.
*5: Select the option code “/ATDOC” to follow the ATEX Directive when any of N-IO components are used for explosion
protection.
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers, Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.