Description of MTL4511 MTL5511 Switch Proximity Detector Interface

The MTLx511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area. When selected, open or short circuit conditions in the field wiring are detected by the linefault-detect (LFD) facility and also indicated on the top of the module. Phase reversal for the channel is selected by a switch on the side of the module and output is provided by changeover relay contacts.

SPECIFICATION of MTL4511 MTL5511 Switch Proximity Detector Interface

One
Location of switches
Zone 0, IIC, T6 hazardous area
Div. 1, Group A hazardous location
Location of proximity detector
Zone 0, IIC, T4–6 hazardous area if suitably certified
Div. 1, Group A hazardous location
Hazardous-area inputs
Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR)

Voltage applied to sensor of MTL4511 MTL5511 Switch Proximity Detector Interface

7 to 9V dc from 1kΩ ±10%
Input/output characteristics
Normal phase
Outputs closed if input > 2.1mA (< 2kΩ in input circuit)
Outputs open if input < 1.2mA (> 10kΩ in input circuit)
Hysteresis: 200μA (650Ω) nominal
Line fault detection (LFD) (when selected) of MTL4511 MTL5511 Switch Proximity Detector Interface

User-selectable via switches on the side of the unit. A line fault is indicated by an LED. The channel output relay is de-energised if an input line fault is detected.
Open-circuit alarm on if Iin < 50μA
Open-circuit alarm off if Iin > 250μA
Short-circuit alarm on if Rin < 100Ω
Short-circuit alarm off if Rin > 360Ω
Note: Resistors must be fitted when using the LFD facility with a contact input
500Ω to 1kΩ in series with switch
20kΩ to 25kΩ in parallel with switch

Safe-area output of MTL4511 MTL5511 Switch Proximity Detector Interface

LED indicators
Green: power indication
Yellow: channel status, on when output energised
Red: LFD indication, on when line fault detected
Maximum current consumption
25mA at 24V
Power dissipation within unit
0.6W at 24V

Safety description (each channel) of MTL4511 MTL5511 Switch Proximity Detector Interface

Uo=10.5V Io=14mA Po=37mW Um = 253V rms or dc
SIL
2
IEC 61508:2010
SIL capable
These models have been assessed for use in IEC 61508 functional safety applications.See data on MTL web site and refer to the safety manual.

Digital Input     MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4501-SR     1ch DI failsafe solid-state output + LFD alarm        
MTL4504          1ch DI relay output + LFD alarm + phase reversal
MTL4510          4ch DI solid-state output        
MTL4510B        4ch DI multifunction solid-state output
MTL4511          1ch DI relay output
MTL4513          2ch DI solid-state output        
MTL4514/B       1ch DI relay output + LFD alarm     
MTL4516          2ch DI relay output
MTL4516C        2ch DI with changeover relay output     
MTL4517          2ch DI relay output + LFD alarm     
Digital Output  MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4521          Loop powered solenoid driver
MTL4521L         Loop powered solenoid driver IIC    
MTL4523          Solenoid driver with LFD
MTL4523L         Loop powered solenoid driver + LFD       
MTL4523R         Solenoid driver with LFD
MTL4523V/VL    Solenoid/Alarm driver with voltage control    
MTL4524           Switch operated solenoid driver     
MTL4524S         Switch operated solenoid driver, 24V override       
MTL4525           Switch operated solenoid driver low power   
MTL4526           2ch switch operated relay      

Analogue Input   MTL4511 MTL5511 Switch Proximity Detector Interface

MTL4541           1ch 2/3 wire Transmitter repeater
MTL4541A         1ch Transmitter repeater, passive input         
MTL4541AS       1ch Transmitter repeater, passive input, current sink   
MTL4541B          MTL4041B replacement
MTL4541P          MTL4041P replacement
MTL4541S          1ch 2/3 wire Transmitter repeater, current sink    
MTL4544            2ch 2/3 wire Transmitter repeater
MTL4544A          2ch Transmitter repeater, passive input         
MTL4544AS        2ch Transmitter repeater, passive input, current sink   
MTL4544B          MTL4044 replacement   
MTL4544D          2/3 wire transmitter repeater, dual output   
MTL4544S          2ch 2/3 transmitter repeater, current sink    
Analogue Output  MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4546            1ch 4-20mA smart isolating driver + LFD        
MTL4546C          1ch 4-20mA smart isolating driver + oc LFD   
MTL4546Y          1ch 4-20mA smart isolating driver + oc LFD   
MTL4549            2ch 4-20mA smart isolating driver + LFD        
MTL4549C          2ch 4-20mA smart isolating driver + oc LFD   
MTL4549Y          2ch 4-20mA smart isolating driver + oc LFD   
Temperature Input   MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4575            1ch Temperature converter with alarm
MTL4576-RTD     2ch Temperature converter, RTD   
MTL4576-THC     2ch Temperature converter, THC   
MTL4581            1ch mV/THC isolator for low-level signals     
Pulse and Vibration   MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4531            1ch vibration probe interface
MTL4532            1ch pulse isolator, digital or analogue output         
MTL4533            2ch vibration probe interface
Fire and Smoke   MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4561            2ch loop-powered, for fire and smoke detectors  
General               MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4599             Dummy isolator      
MTL4599N           General purpose feed-through module
MTL4500 Series Barriers     MTL4511 MTL5511 Switch Proximity Detector Interface

MTL4600 Series Barriers         MTL4511 MTL5511 Switch Proximity Detector Interface

MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4511 MTL5511 Switch Proximity Detector Interface
MTL4511 MTL5511 Switch Proximity Detector Interface

MTL4511 MTL5511 Switch Proximity Detector Interface

MTL4511 MTL5511 Switch Proximity Detector Interface
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers, Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.