Description of MTL4641 MTL4641S Repeater Power Supply
MTL4641/S REPEATER POWER SUPPLY
4/20mA, HART®, 2- or 3-wire transmitters
The MTL4641 provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter and repeating the current in another floating circuit to drive a load. For HART 2-wire transmitters,the unit allows bi-directional communications signals superimposed on the 4/20mA loop current. Alternatively, the MTL4641S acts as a current sink rather than driving a current into the load.
Technical SPECIFICATION of MTL4641 MTL4641S Repeater Power Supply
MTL4641 MTL4641S Repeater Power Supply
See also common specification
Number of channels
One
Output of MTL4641 MTL4641S Repeater Power Supply
Signal range: 4 to 20mA
Under/over-range: 0 to 24mA
Load resistance (MTL4641)
@ 24mA: 0 to 375Ω
@ 20mA: 0 to 465Ω
Load (MTL4641S)
Current sink: 600Ω max.
Maximum voltage source: 24V dc
Circuit output resistance: > 1MΩ
Circuit ripple
< 50µA peak-to-peak
Input of MTL4641 MTL4641S Repeater Power Supply
Signal range: 0 to 24mA (including over-range)
Transmitter voltage: 20V at 20mA (MTL4641)
16.5V at 20mA (MTL4641S)
MTL4641 MTL4641S Repeater Power Supply
Transfer accuracy at 20°C
Better than 20µA 4-20mA (Terminals 1 & 2)
Better than 30µA 4-20mA (Terminals 1 & 3)
Temperature drift
< 0.8µA/°C
Response time
Settles to within 10% of final value within 50µs
Communications supported
HART (terminals 1 & 2 only)
LED indicator
Green: power indication
Maximum current consumption (with 20mA signal)
53mA at 24V
Power dissipation within unit (with 20mA signal)
MTL4641 0.8W @ 24V dc
MTL4641S 1.0W @ 24V dc
MTL4600 Series Barriers Similar Models of MTL4641 MTL4641S Repeater Power Supply
Ordering Models of MTL4641 MTL4641S Repeater Power Supply
Digital Input MTL4641 MTL4641S Repeater Power Supply
MTL4501-SR 1ch DI failsafe solid-state output + LFD alarm
MTL4504 1ch DI relay output + LFD alarm + phase reversal
MTL4510 4ch DI solid-state output
MTL4510B 4ch DI multifunction solid-state output
MTL4511 1ch DI relay output
MTL4513 2ch DI solid-state output
MTL4514/B 1ch DI relay output + LFD alarm
MTL4516 2ch DI relay output
MTL4516C 2ch DI with changeover relay output
MTL4517 2ch DI relay output + LFD alarm
Digital Output MTL4641 MTL4641S Repeater Power Supply
MTL4521 Loop powered solenoid driver
MTL4521L Loop powered solenoid driver IIC
MTL4523 Solenoid driver with LFD
MTL4523L Loop powered solenoid driver + LFD
MTL4523R Solenoid driver with LFD
MTL4523V/VL Solenoid/Alarm driver with voltage control
MTL4524 Switch operated solenoid driver
MTL4524S Switch operated solenoid driver, 24V override
MTL4525 Switch operated solenoid driver low power
MTL4526 2ch switch operated relay
Analogue Input MTL4641 MTL4641S Repeater Power Supply
MTL4541 1ch 2/3 wire Transmitter repeater
MTL4541A 1ch Transmitter repeater, passive input
MTL4541AS 1ch Transmitter repeater, passive input, current sink
MTL4541B MTL4041B replacement
MTL4541P MTL4041P replacement
MTL4541S 1ch 2/3 wire Transmitter repeater, current sink
MTL4544 2ch 2/3 wire Transmitter repeater
MTL4544A 2ch Transmitter repeater, passive input
MTL4544AS 2ch Transmitter repeater, passive input, current sink
MTL4544B MTL4044 replacement
MTL4544D 2/3 wire transmitter repeater, dual output
MTL4544S 2ch 2/3 transmitter repeater, current sink
Analogue Output MTL4641 MTL4641S Repeater Power Supply
MTL4546 1ch 4-20mA smart isolating driver + LFD
MTL4546C 1ch 4-20mA smart isolating driver + oc LFD
MTL4546Y 1ch 4-20mA smart isolating driver + oc LFD
MTL4549 2ch 4-20mA smart isolating driver + LFD
MTL4549C 2ch 4-20mA smart isolating driver + oc LFD
MTL4549Y 2ch 4-20mA smart isolating driver + oc LFD
Temperature Input MTL4641 MTL4641S Repeater Power Supply
MTL4575 1ch Temperature converter with alarm
MTL4576-RTD 2ch Temperature converter, RTD
MTL4576-THC 2ch Temperature converter, THC
MTL4581 1ch mV/THC isolator for low-level signals
Pulse and Vibration MTL4641 MTL4641S Repeater Power Supply
MTL4531 1ch vibration probe interface
MTL4532 1ch pulse isolator, digital or analogue output
MTL4533 2ch vibration probe interface
Fire and Smoke MTL4641 MTL4641S Repeater Power Supply
MTL4561 2ch loop-powered, for fire and smoke detectors
General MTL4641 MTL4641S Repeater Power Supply
MTL4599 Dummy isolator
MTL4599N General purpose feed-through module