Description of MTL5553 Isolator Power Supply

MTL5553 ISOLATOR/ POWER SUPPLY
The MTL5553 has been specifically developed to extend 31.25kbit/s (H1) fieldbus networks into hazardous areas. It provides power and communication to devices powered through the signal conductors. For installations in which the safe-area bus length is small an internal terminator can be enabled by a switch on top of the module.
The MTL5553 complies with requirements of Fieldbus Foundation™ specified power supply Type 133† (IS power supply).

SPECIFICATION of MTL5553 Isolator Power Supply

See also common specification
Location of fieldbus device(s)
Zone 0, IIC, T4–6 hazardous area if suitably certified

Hazardous-area fieldbus power supply
18.4V ± 2%
105Ω ±3% dc impedance
80mA maximum current
Maximum cable length
Determined by IS requirements, depending on other devices attached and maximum acceptable voltage drop along cable
Digital signal transmission
Compatible with 31.25kbit/s fieldbus systems and complies with fieldbus standards†
Supply voltage
20 to 35Vdc
LED indicator
Green: one provided for power indication

Power requirement, Vs, with 80mA output load
135mA typical at 24V

105mA at 35V

Power dissipation within unit, with 80mA output load
2.3W typical at 24V
2.6W maximum at 35V
Note: To allow adequate heat dissipation under all likely thermal conditions, it is recommended that MTL5553’s are installed on a horizontal DIN-rail mounted on a vertical surface* with a 10mm space between adjacent units. MTL MS010 10mm DIN-rail module spacers are available for this purpose.
* If an MTL5553 is mounted in a non-optimum orientation, the maximum operating temperature is reduced to 45°C.

Isolation
250V ac between safe- and hazardous-area circuits and power supply
Safety description
Terminals 1 and 2
22V, 102Ω, 216mA; Um = 250V rms or dc
MTL5553 Isolator Power Supply
MTL5011B , upgraded model: MTL5511
MTL5018 , upgraded model: MTL5516C
MTL5041 , upgraded model: MTL5541
MTL5042 , upgraded model: MTL5541
MTL5043 , upgraded model: MTL5544
MTL5044 , upgraded model: MTL5544
MTL5045 , upgraded model: MTL5546
MTL5046 , upgraded model: MTL5546
MTL5074 , upgraded model: MTL5575
MTL7787+
MTL5022 , upgraded model: MTL5522
MTL5031 , upgraded model: MTL5531 or MTL5533
Part Number & Description of MTL5553 Isolator Power Supply
Digital Input     MTL5553 Isolator Power Supply
MTL4501-SR     1ch DI failsafe solid-state output + LFD alarm        
MTL4504          1ch DI relay output + LFD alarm + phase reversal
MTL4510          4ch DI solid-state output        
MTL4510B        4ch DI multifunction solid-state output
MTL4511          1ch DI relay output
MTL4513          2ch DI solid-state output        
MTL4514/B       1ch DI relay output + LFD alarm     
MTL4516          2ch DI relay output
MTL4516C        2ch DI with changeover relay output     
MTL4517          2ch DI relay output + LFD alarm     
Digital Output   MTL5553 Isolator Power Supply
MTL4521          Loop powered solenoid driver
MTL4521L         Loop powered solenoid driver IIC    
MTL4523          Solenoid driver with LFD
MTL4523L         Loop powered solenoid driver + LFD       
MTL4523R         Solenoid driver with LFD
MTL4523V/VL    Solenoid/Alarm driver with voltage control    
MTL4524           Switch operated solenoid driver     
MTL4524S         Switch operated solenoid driver, 24V override       
MTL4525           Switch operated solenoid driver low power   
MTL4526           2ch switch operated relay      
Analogue Input   MTL5553 Isolator Power Supply
MTL4541           1ch 2/3 wire Transmitter repeater
MTL4541A         1ch Transmitter repeater, passive input         
MTL4541AS       1ch Transmitter repeater, passive input, current sink   
MTL4544D          2/3 wire transmitter repeater, dual output   
MTL4544S          2ch 2/3 transmitter repeater, current sink    
Analogue Output   MTL5553 Isolator Power Supply
MTL4546            1ch 4-20mA smart isolating driver + LFD        
MTL4546C          1ch 4-20mA smart isolating driver + oc LFD   
MTL4546Y          1ch 4-20mA smart isolating driver + oc LFD   
MTL4549            2ch 4-20mA smart isolating driver + LFD        
MTL4549C          2ch 4-20mA smart isolating driver + oc LFD   
MTL4549Y          2ch 4-20mA smart isolating driver + oc LFD   
Temperature Input    MTL5553 Isolator Power Supply
MTL4575            1ch Temperature converter with alarm
MTL4576-RTD     2ch Temperature converter, RTD   
MTL4576-THC     2ch Temperature converter, THC   
MTL4581            1ch mV/THC isolator for low-level signals     
Pulse and Vibration   MTL5553 Isolator Power Supply
MTL4531            1ch vibration probe interface
MTL4532            1ch pulse isolator, digital or analogue output         
MTL4533            2ch vibration probe interface
Fire and Smoke   MTL5553 Isolator Power Supply
MTL4561            2ch loop-powered, for fire and smoke detectors  
General            MTL5553 Isolator Power Supply
MTL4599             Dummy isolator      
MTL4599N           General purpose feed-through module
MTL4500 Series Barriers     MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply

MTL5553 Isolator Power Supply
ICC    MTL5553 Isolator Power Supply

MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply
MTL5553 Isolator Power Supply

MTL5553 Isolator Power Supply

MTL5314 MTL5344 MTL5349 MTL5531-111LI MTL5531-115LI MTL5991 MPA5500 

MTL5553 Isolator Power Supply

MTL5553 Isolator Power Supply
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers,Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.