Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Features

SMART Transmitter Power Supply KFD2-STV4-Ex2-1
2-channel isolated barrier
24 V DC supply (Power Rail)
Input 2-wire SMART transmitters
Output 0/1 V … 5 V
Terminals with test points
Up to SIL 2 acc. to IEC/EN 61508

Datasheet excerpt: Technical data of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

General specifications of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Signal type Analog input

Functional safety related parameters of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Safety Integrity Level (SIL) SIL 2

Supply of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Connection Power Rail or terminals 14+, 15-
Rated voltage 20 … 35 V DC
Ripple within the supply tolerance
Power dissipation 1.8 W
Power consumption max. 2.7 W

Input of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Connection side field side
Connection terminals 1+, 3-; 4+, 6-
Input signal 0/4 … 20 mA
Available voltage ≥ 16 V at 20 mA, terminals 1+, 3

Output of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Connection side control side
Connection terminals 7-, 8+; 10-, 11+
Load output resistance: 250 Ω
Output signal 0/1 … 5 V
Ripple max. 12.5 mV

Transfer characteristics of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Deviation at 20 °C (68 °F), 0/1 … 5 V ≤ 5 mV incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage
Influence of ambient temperature ≤ 20 ppm/K
Frequency range field side into the control side: bandwidth with 0.5 Vpp signal 0 … 7.5 kHz (-3 dB)
control side into the field side: bandwidth with 0.5 Vpp signal 0.3 … 7.5 kHz (-3 dB)
Rise time 20 µs
Settling time 200 µs
De-energized delay 20 µs

Galvanic isolation of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Output/power supply functional insulation, rated insulation voltage 50 V AC
Output/Output functional insulation, rated insulation voltage 50 V AC

Indicators/settings of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Display elements LED
Labeling space for labeling at the front

Directive conformity of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)

Conformity of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Electromagnetic compatibility NE 21:2011
Degree of protection IEC 60529:2001
Protection against electrical shock UL 61010-1:2012

Ambient conditions of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Ambient temperature -20 … 60 °C (-4 … 140 °F)
Mechanical specifications
Degree of protection IP20
Connection screw terminals
Mass approx. 150 g
Dimensions 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001

Data for application in connection with hazardous areas of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

EU-type examination certificate BAS 99 ATEX 7025 X
Marking Ex-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I
Input [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Voltage 25.2 V
Current 93 mA
Power 0.586 W
Supply
Maximum safe voltage 250 V (Attention! The rated voltage can be lower.)
Certificate TÜV 99 ATEX 1499 X
Marking Ex-Hexagon II 3G Ex nA II T4 [device in zone 2]

Galvanic isolation of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V

Directive conformity of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010

International approvals of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

UL approval
Control drawing 116-0428 (cULus)
IECEx approval
IECEx certificate IECEx BAS 04.0015X
IECEx CML 15.0055X
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Ex nA IIC T4 Gc

General information of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications of Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply

System Classcode
ECLASS 11.0 27210119
ECLASS 10.0.1 27210119
ECLASS 9.0 27210119
ECLASS 8.0 27210119
ECLASS 5.1 27210119
ETIM 8.0 EC001485
ETIM 7.0 EC001485
ETIM 6.0 EC001485
ETIM 5.0 EC001485
UNSPSC 12.1 32101514

Pepperl+Fuchs KFD2-STV4-Ex2-1 SMART Transmitter Power Supply