Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Features

Universal Temperature Converter KFD2-UT2-Ex2-1

2-channel isolated barrier
24 V DC supply (Power Rail)
Thermocouple, RTD, potentiometer or voltage input
Usable as signal splitter (1 input and 2 outputs)
Voltage output 0/1 V … 5 V
Configurable by PACTware
Line fault (LFD) and sensor burnout detection
Up to SIL 2 acc. to IEC 61508/IEC 61511

Technical Specification of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

General specifications of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Signal type Analog input

Functional safety related parameters of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Safety Integrity Level (SIL) SIL 2

Supply of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Connection terminals 14+, 15- or power feed module/Power Rail
Rated voltage 20 … 30 V DC
Ripple within the supply tolerance
Power dissipation ≤ 0.8 W
Power consumption max. 0.8 W

Interface of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Programming interface programming socket

Input of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Connection side field side
Connection terminals 1, 2, 3; 4, 5, 6
type Ni100 (DIN 43760)
Measuring current approx. 200 µA with RTD
Types of measuring 2-, 3-wire connection
Lead resistance max. 50 Ω per line
Measurement loop monitoring sensor breakage, sensor short-circuit
Thermocouples type B, E, J, K, N, R, S, T (IEC 584-1: 1995)
type L (DIN 43710: 1985)
type TXK, TXKH, TXA (P8.585-2001)
Cold junction compensation external and internal
Measurement loop monitoring sensor breakage
Potentiometer 0 … 20 kΩ (2-wire connection), 0.8 … 20 kΩ (3-wire connection)
Voltage selectable within the range -100 … 100 mV
Input resistance ≥ 1 MΩ (-100 … 100 mV)

Output of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Connection side control side
Voltage output 0 … 5 V or 1 … 5 V ; output resistance: ≤ 5 Ω ; load: ≥ 10 kΩ
Connection output I: terminals 7-, 8+
output II: terminals 10-, 11+
Fault signal downscale 0 V or 0.5 V, upscale 5.375 V

Transfer characteristics of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Deviation
After calibration Pt100: ± (0.06 % of measurement value in K + 0.1 K (4-wire connection))
thermocouple: ± (0.05 % of measurement value in °C + 1 K (1.2 K for types R and S)) , includes ± 0.8 K fault of the cold junction compensation (CJC)
mV: ± 50 µV
potentiometer: ± 0.05 % of full scale, (excludes faults due to lead resistance)
output: 1 to 5 V output: ± 4 mV from 0 to 103.1 % of span; 0 to 5 V output: ± 4 mV from 0.3 to 102.5 % of span
Influence of ambient temperature Pt100: ± (0.0015 % of measurement value in K + 0.0075 % of span)/K ΔTamb*)
thermocouple: ± (0.02 K + 0.005 % of measurement value in °C + 0.0075 % of span)/K ΔTamb*) , influence of cold junction compensation (CJC) included:
mV: ± (0.01 % of measurement value + 0.0075 % of span)/K ΔTamb*)
potentiometer: ± 0.0075 % of span/K ΔTamb*)
*) ΔTamb = ambient temperature change referenced to 23 °C (296 K)
Influence of supply voltage < 0.01 % of span
Reaction time worst case value (sensor breakage and/or sensor short circuit detection enabled)
mV: 1.2 s, thermocouples with CJC: 1.4 s, thermocouples with fixed ref. temp: 1.4 s, 3- or 4-wire RTD: 1.1 s, 2-wire RTD: 920 ms, Potentiometer: 3-wire connection 2.8 s, 2-wire connection 2.25 s

Galvanic isolation of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Output/supply, programming input functional insulation, rated insulation voltage 50 V AC
There is no electrical isolation between the programming input and the supply.
The programming cable provides galvanic isolation so that ground loops are avoided.

Indicators/settings of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Display elements LEDs
Configuration via PACTware
Labeling space for labeling at the front

Directive conformity of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)

Conformity of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Electromagnetic compatibility NE 21:2006
Degree of protection IEC 60529:2001
Protection against electrical shock UL 61010-1:2004

Ambient conditions of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Ambient temperature -20 … 60 °C (-4 … 140 °F)
extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions

Mechanical specifications of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Degree of protection IP20
Connection screw terminals
Mass approx. 130 g
Dimensions 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001

Data for application in connection with hazardous areas of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

EU-type examination certificate CESI 04 ATEX 143
Marking Ex-Hexagon II (1)G [Ex ia Ga] IIC
Ex-Hexagon II (1)D [Ex ia Da] IIIC
Ex-Hexagon I (M1) [Ex ia Ma] I
Input Ex ia
Inputs terminals 1, 2, 3, 4, 5, 6 (for passive equipment)
Voltage Uo 9 V
Current Io 22 mA
Power Po 50 mW
Analog outputs, power supply, collective error
Maximum safe voltage 250 V (Attention! This is not the rated voltage.)
Interface
Maximum safe voltage 250 V (Attention! The rated voltage is lower.), RS 232
Certificate TÜV 02 ATEX 1797 X
Marking Ex-Hexagon II 3G Ex nA II T4
Galvanic isolation
Input/Other circuits safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 50303:2000
International approvals of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

UL approval
Control drawing 116-0410
CSA approval
Control drawing 116-0314 (cCSAus)
116-0347
IECEx approval
IECEx certificate IECEx TUN 07.0003
IECEx CML 16.0126X
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Ex nA IIC T4 Gc

General information of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

System Classcode
ECLASS 11.0 27210129
ECLASS 10.0.1 27210129
ECLASS 9.0 27210129
ECLASS 8.0 27210190
ECLASS 5.1 27210107
ETIM 8.0 EC002919
ETIM 7.0 EC002919
ETIM 6.0 EC002919
ETIM 5.0 EC001485
UNSPSC 12.1 32101514



Similar Models of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters
KCD2-UT2-Ex1
Universal Temperature Converter
1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-Ex1
Universal Temperature Converter
1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-Ex2
Universal Temperature Converter
2-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Usable as signal splitter (1 input and 2 outputs), Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KCD2-UT2-1
Universal Temperature Converter
1-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-1
Universal Temperature Converter
1-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511

Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

KFD2-UT2-2
Universal Temperature Converter
2-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Usable as signal splitter (1 input and 2 outputs), Current output 0/4 mA … 20 mA, Sink or source mode, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-Ex1-1
Universal Temperature Converter
1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V … 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-Ex2-1
Universal Temperature Converter
2-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Usable as signal splitter (1 input and 2 outputs), Voltage output 0/1 V … 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-1-1
Universal Temperature Converter
1-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V … 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFD2-UT2-2-1
Universal Temperature Converter
2-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Usable as signal splitter (1 input and 2 outputs), Voltage output 0/1 V … 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC 61508/IEC 61511

Ordering Codes of Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters

K-LB-1.6 FN-LB-I FP-LB-I FS-LB-I

Pepperl+Fuchs KFD2-UT2-Ex2-1 Universal Temperature Converters