Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Features of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Fieldbus Power Repeater KLD2-PR-Ex1.IEC1
Power supply of fieldbus segments according to IEC 61158-2
Signal repeater for fieldbus topologies in accordance to FISCO
100 mA supply of the field side
Improves the fieldbus signal
Extension of the transmission distance by means of opening a new fieldbus segment
Integrated bus terminations
Removable terminals and Power Rail connection for simple installation
Supply via Power Rail
Technical data of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Supply of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Connection Power Rail or terminals 59+, 60-
Rated voltage 20 … 35 V DC
Ripple ≤ 10 %
Rated current 410 mA … 170 mA
Fieldbus connection of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Field-side
Connection terminals 3, 18+; 2, 17-
Rated voltage 12.8 … 13.4 V DC
Rated current max. 100 mA
Terminating impedance 100 Ω , integrated
Host-side
Connection Power Rail or terminals 40, 55+, 41, 56-
Rated voltage 9 … 32 V DC (supplied switch S2 in pos. I)
0 V DC (not supplied switch S2 in pos. II)
Terminating impedance 100 Ω switchable off and on via rotary switch S1: 1 -> on; 0 -> off
Galvanic isolation of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Field-side/Host-side safe galvanic isolation acc. to EN 50020, voltage peak value 375 V
Host-side/Supply functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff
Field-side/Supply safe galvanic isolation acc. to EN 50020, voltage peak value 375 V
All circuits/FE functional insulation acc. to DIN EN 50178, rated insulation voltage 253 Veff
Directive conformity of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013
Standard conformity of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Galvanic isolation EN 50178, EN 50020
Electromagnetic compatibility NAMUR NE 21
Degree of protection IEC/EN 60529
Fieldbus standard IEC 61158-2, ISA S 50.02 part 2
Climatic conditions DIN IEC 721
Ambient conditions of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Classification 3K3
Ambient temperature -20 … 60 °C (-4 … 140 °F)
Storage temperature -20 … 85 °C (-4 … 185 °F)
Relative humidity < 75 %
Pollution degree max. 2, according to IEC 60664
Mechanical specifications of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Connection type Terminals
Core cross-section up to 2.5 mm2
Housing 100 mm x 115 mm x 107 mm
Degree of protection IP20
Mass approx. 600 g
Mounting DIN rail mounting
Data for application in connection with hazardous areas of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
EU-type examination certificate PTB 99 ATEX 2142
Marking Ex-Hexagon II (1) G [Ex ia] IIC Ga
Ex-Hexagon II (1) D [Ex ia] IIIC Da
Supply
Maximum safe voltage 253 V AC / 125 V DC (Attention! Um is no rated voltage.)
Field-side
Voltage Uo 15 V
Current Io 207.2 mA
Power Po 1.93 W
Maximum safe voltage Um 60 V (Attention! The rated voltage can be lower.)
Certificate PF 15 CERT 3527 X
Marking Ex-Hexagon II 3G Ex ec IIC T4 Gc
Directive conformity
Directive 2014/34/EU EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012
International approvals of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
FM approval CoC 3008872
Control drawing No. 116-0190
Approved for Class I, Division 2, Groups A, B, C, D / Class I, Zone 2, Group IIC T4
General information of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Supplementary information Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Classifications of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
System Classcode
ECLASS 11.0 27242611
ECLASS 10.0.1 27242611
ECLASS 9.0 27242611
ECLASS 8.0 27242611
ECLASS 5.1 27242611
ETIM 8.0 EC002583
ETIM 7.0 EC002583
ETIM 6.0 EC002583
ETIM 5.0 EC001604
UNSPSC 12.1 39121004
Similar models of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
KLD2-PR-1.IEC
Fieldbus Power Repeater
Output: 24 … 26 V/400 mA, For extension of fieldbus segments, High-power trunk for high device count and long cable lengths, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA
KLD2-PR-Ex1.IEC
Fieldbus Power Repeater
Power supply of fieldbus segments according to IEC 61158-2, Signal repeater for fieldbus topologies in accordance to Entity, 70 mA supply of the field side, Improves the fieldbus signal, Extension of the transmission distance by means of opening a new fieldbus segment
KLD2-PR-Ex1.IEC1
Fieldbus Power Repeater
Power supply of fieldbus segments according to IEC 61158-2, Signal repeater for fieldbus topologies in accordance to FISCO, 100 mA supply of the field side, Improves the fieldbus signal, Extension of the transmission distance by means of opening a new fieldbus segment
Ordering Codes of Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
Pepperl+Fuchs KLD2-PR-Ex1.IEC1 Fieldbus Power Repeater
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers,Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.