Schneider Electric ATS22C17Q Soft Starters

Features

Schneider Electric Soft Starter-ATS22-control 220V-power 230V(45kW)/400…440V(90kW)
ATS22C17Q
Provide smooth starting, avoiding mechanical stresses and extending their service life
Reduce hearing discomfort for operators on the workfloor
Slim form factor improves versatility
Less cost to stock spares
Overcome difficult or high-torque starts
Environmental performance of the product 
Specifications of Schneider Electric ATS22C17Q Soft Starters

Main of Schneider Electric ATS22C17Q Soft Starters

range of product
Altistart 22
product or component type
Soft starter
product destination
Asynchronous motors
product specific application
Pumps and fans
component name
ATS22
network number of phases
3 phases
[Us] rated supply voltage
230…440 V – 15…10 %
motor power kW
45 kW 230 V
90 kW 400 V
90 kW 440 V
factory setting current
162 A
power dissipation in W
91 W for standard applications
utilisation category
AC-53A
type of start
Start with torque control (current limited to 3.5 In)
IcL starter rating
170 A for connection in the motor supply line for standard applications
IP degree of protection
IP00

Complementary of Schneider Electric ATS22C17Q Soft Starters

assembly style
With heat sink
function available
Internal bypass
supply voltage limits
195…484 V
supply frequency
50…60 Hz – 10…10 %
network frequency
45…66 Hz
device connection
To the motor delta terminals
In the motor supply line
[Uc] control circuit voltage
230 V – 15…10 % 50/60 Hz
control circuit consumption
20 W
discrete output number
2
discrete output type
Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
minimum switching current
100 mA at 12 V DC (relay outputs)
maximum switching current
5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs
discrete input number
3
discrete input type
(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
discrete input voltage
24 V <= 30 V
discrete input logic
Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
output current
0.4…1 Icl adjustable
PTC probe input
750 Ohm
communication port protocol
Modbus
connector type
1 RJ45
communication data link
Serial
physical interface
RS485 multidrop
transmission rate
4800, 9600 or 19200 bps
installed device
31
protection type
Phase failure: line
Thermal protection: motor
Thermal protection: starter
marking
CE
type of cooling
Forced convection
operating position
Vertical +/- 10 degree
height
356 mm
width
150 mm
depth
229.5 mm
net weight
18 kg
Motor power range AC-3
30…50 kW at 200…240 V 3 phases
55…100 kW at 380…440 V 3 phases
motor starter type
Soft starter

Environment of Schneider Electric ATS22C17Q Soft Starters

electromagnetic compatibility
Conducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards
EN/IEC 60947-4-2
product certifications
CSA
C-Tick
GOST
UL
CCC
vibration resistance
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60068-2-27
noise level
56 dB
pollution degree
Level 2 conforming to IEC 60664-1
relative humidity
0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation
-10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C)
ambient air temperature for storage
-25…70 °C
operating altitude
<= 1000 m without derating
> 1000…< 2000 m with current derating of 2.2 % per additional 100 m

Packing Units of Schneider Electric ATS22C17Q Soft Starters

Unit Type of Package 1 PCE
Number of Units in Package 1  1
Package 1 Weight 13.218 kg
Package 1 Height 25 cm
Package 1 width 33 cm
Package 1 Length 41 cm
Unit Type of Package 2 P06
Number of Units in Package 2 4
Package 2 Weight  64.064 kg
Package 2 Height  73.5 cm
Package 2 width   80 cm
Package 2 Length  60 cm

Contractual warranty of Schneider Electric ATS22C17Q Soft Starters

Warranty 18 months

Similar Models Schneider Electric ATS22C17Q Soft Starters

Schneider Electric ATS22C17Q Soft Starters
Schneider Electric ATS22C17Q Soft Starters
Schneider Electric ATS22C17Q Soft Starters
Schneider Electric ATS22C17Q Soft Starters
Schneider Electric ATS22C17Q Soft Starters
KL Series Schneider Electric ATS22C17Q Soft Starters
EL series  Schneider Electric ATS22C17Q Soft Starters

CX Series  Schneider Electric ATS22C17Q Soft Starters

KM series  Schneider Electric ATS22C17Q Soft Starters

FM Series Schneider Electric ATS22C17Q Soft Starters


Schneider Electric ATS22C17Q Soft Starters

I/O Systems Item no. 750-1405
16-channel digital input; 24 VDC; 3 ms
I/O Systems Item no. 750-430
8-channel digital input; 24 VDC; 3 ms
I/O Systems Item no. 750-530
8-channel digital output; 24 VDC; 0.5 A
Controller Item no. 750-891
Controller Modbus TCP; 4th Generation; 2 x ETHERNET

I/O Systems Item no. 750-1504
16-channel digital output; 24 VDC; 0.5 A
I/O Systems Item no. 750-455
4-channel analog input; 4 … 20 mA; Single-ended
I/O Systems Item no. 750-362
Fieldbus Coupler Modbus TCP; 4th generation
I/O Systems Item no. 750-375
Fieldbus Coupler PROFINET IO; 3rd Generation; Advanced
I/O Systems Item no. 750-652
RS-232/485 Serial Interface

I/O Systems Item no. 750-461
2-channel analog input; For Pt100/RTD resistance sensors
I/O Systems Item no. 750-451
8-channel analog input; Resistance measurement; Adjustable
I/O Systems Item no. 750-466
2-channel analog input; 4 … 20 mA; Single-ended
I/O Systems Item no. 750-333
Fieldbus Coupler PROFIBUS DP; 2nd Generation; 12 MBd
I/O Systems Item no. 750-496
8-channel analog input; 0/4 … 20 mA; Single-ended

I/O Systems Item no. 750-559
4-channel analog output; 0 … 10 VDC
I/O Systems Item no. 750-450
4-channel analog input; Resistance measurement; Adjustable
I/O Systems Item no. 750-363
Fieldbus Coupler EtherNet/IP; 4th generation; ECO
I/O Systems Item no. 750-554
2-channel analog output; 4 … 20 mA
I/O Systems Item no. 750-600
End Module
Schneider Electric ATS22C17Q Soft Starters
I/O Systems Item no. 750-555
4-channel analog output; 4 … 20 mA
Controller Item no. 750-8101
Controller PFC100; 2 x ETHERNET
I/O Systems Item no. 750-454
2-channel analog input; 4 … 20 mA; Differential input
I/O Systems Item no. 750-459
4-channel analog input; 0 … 10 VDC; Single-ended
Controller Item no. 750-8100
Controller PFC100; 2 x ETHERNET; ECO

I/O Systems Item no. 750-1500
16-channel digital output; 24 VDC; 0.5 A; Ribbon cable
Controller Item no. 750-832
Controller BACnet/IP; 4th generation; 2 x ETHERNET, SD Card Slot
Controller Item no. 750-890
Controller Modbus TCP; 4th Generation; 2 x ETHERNET; SD Card Slot
I/O Systems Item no. 750-439
8-channel digital input; NAMUR; Intrinsically safe
I/O Systems Item no. 750-497
8-channel analog input; 0 … 10 V/±10 VDC; Single-ended

I/O Systems Item no. 750-550
2-channel analog output; 0 … 10 VDC
I/O Systems Item no. 750-402
4-channel digital input; 24 VDC; 3 ms
I/O Systems Item no. 750-613
System Power Supply; 24 VDC
I/O Systems Item no. 750-1415
8-channel digital input; 24 VDC; 3 ms; 2-conductor connection
I/O Systems Item no. 750-515
4-channel relay output; AC 250 V; 2.0 A; Potential-free; 4 make contacts
I/O Systems Item no. 750-504
4-channel digital output; 24 VDC; 0.5 A
I/O Systems Item no. 750-597
8-channel analog output; 0 … 10 V/±10 VDC
Controller Item no. 750-8102
Controller PFC100; 2 x ETHERNET, RS-232/-485

I/O Systems Item no. 750-377

Fieldbus Coupler PROFINET IO; 3rd Generation; ECO Advanced

I/O Systems Item no. 750-602
Power Supply; 24 VDC

Schneider Electric ATS22C17Q Soft Starters
568 Ex Intrinsically Safe Mini Infrared Thermometer

Schneider Electric ATS22C17Q Soft Starters
754 Documenting Process Calibrator-HART
753 Documenting Process Calibrator
726 Precision Multifunction Process Calibrator
725 Multifunction Process Calibrator
725Ex Intrinsically Safe Multifunction Process Calibrator
789 ProcessMeter
719 Pressure Calibrator
709 Precision Loop Calibrator
709H Precision Loop Calibrator with HART Communications / Diagnostics
707 Loop Calibrator with Quick Click Knob
707Ex Intrinsically Safe Loop Calibrator »
715 Volt/mA Calibrator »
705 Loop Calibrator »
771 Milliamp Process Clamp Meter »
772 Milliamp Clamp Meter »
787 ProcessMeterTM »
773 Milliamp Process Clamp Meter »
709H Precision Loop Calibrator with HART Communications / Diagnostics
707 Loop Calibrator with Quick Click Knob
707Ex Intrinsically Safe Loop Calibrator »
715 Volt/mA Calibrator »
705 Loop Calibrator »
771 Milliamp Process Clamp Meter »
772 Milliamp Clamp Meter »
787 ProcessMeterTM »
773 Milliamp Process Clamp Meter »