MTL4544 / MTL4544S Repeater Power Supply
ModelMTL4544 MTL4544S
Repeater power supply for 2- or 3-wire 4/20 mA or HART transmitters. Channels: Two; safe-area output: 4–20 mA (MTL4544: load 0–450 Ω at 20 mA; MTL4544S: current sink, 600 Ω max.).
- Channels
- Two
- Transmitter voltage
- 16.5 V at 20 mA
- Transfer accuracy
- Better than 15 µA at 20 °C
- Current consumption
- 96 mA at 24 V DC (20 mA signal)
Availability and lead time confirmed on request
Overview
MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
Description of MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
MTL4544/S provides fully-floating dc supplies for energising two conventional 2-wire or 3-wire 4/20mA or HART transmitters located in a hazardous area, and repeats the current in other circuits to drive two safe-area loads. For smart transmitters, the unit allows bi-directional transmission of digital communication signals superimposed on the 4/20mA loop current. Alternatively, the MTL4544S acts as a current sink for a safe-area connection rather than driving a current into the load. Separately powered current sources, such as 4-wire transmitters, can be connected but will not support HART communication.
Specification of MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
See also common specification
Number of channels Two
Location of transmitter Zone 0, IIC, T4–6 hazardous area if suitably certified
Div. 1, Group A hazardous location
Safe-area output
Signal range: 4 to 20mA
Under/over-range: 0 to 24mA
Safe-area load resistance (MTL5544)
@ 24mA: 0 to 360Ω
@ 20mA: 0 to 450Ω
Safe-area load (MTLx544S)
Current sink: 600Ω max.
Maximum voltage source: 24V dc
Safe-area circuit output resistance: > 1MΩ
Safe-area circuit ripple
< 50µA peak-to-peak
Hazardous-area input
Signal range: 0 to 24mA (including over-range)
Transmitter voltage: 16.5V at 20mA
Transfer accuracy at 20°c
Better than 15µA
Temperature drift
< 0.8µA/°C
Response time
Settles to within 10% of final value within 50µs
Communications supported
HART (terminals 1 & 2 and 4 & 5 only)
MTL4500 Series Barriers MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
MTL5521 Solenoid/Alarm Driver, loop-powered, IIC
MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
MTL4544 / MTL4544S Repeater Power Supply, 2-Channel, 4–20 mA HART
Specifications
| Function | Repeater power supply for 2- or 3-wire 4/20 mA or HART transmitters |
|---|---|
| Channels | Two |
| Safe-area output | 4–20 mA (MTL4544: load 0–450 Ω at 20 mA; MTL4544S: current sink, 600 Ω max.) |
| Transmitter voltage | 16.5 V at 20 mA |
| Transfer accuracy | Better than 15 µA at 20 °C |
| Current consumption | 96 mA at 24 V DC (20 mA signal) |
| HART | Supported (terminals 1 & 2 and 4 & 5) |
| Functional safety | SIL 2 capable (single device) |
Source: MTL (Eaton) data sheet MTLx544/S. Confirm with the manufacturer datasheet before ordering.
Documents
- DatasheetPDF · on request Request
- Operating manualPDF · on request Request
- Certificate copy (with order, where available)PDF · on request Request
Downloads will be added after the files have been checked.
Related products
-
MTL4561 Fire and Smoke Detector Interface
MTL4561: channels Two, fully floating (this model: Two)
-
MTL5516C Switch/Proximity Detector Interface
-
MTL5541 Repeater Power Supply
-
MTL7778ac / MTL7787+ Shunt-Diode Safety Barriers
Frequently paired with
Often quoted together with MTL MTL4544.



