Safety Barriers

MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL Safety Barriers

MTL4561 Fire and Smoke Detector Interface

ModelMTL4561

Fire and smoke detector interface, loop powered. Channels: Two, fully floating; detector location: Zone 0, IIC, T4–6 (if suitably certified); Div. 1, Group A; input voltage: 6–30 V DC.

Function
Fire and smoke detector interface, loop powered
Channels
Two, fully floating
Detector location
Zone 0, IIC, T4–6 (if suitably certified); Div. 1, Group A
Input voltage
6–30 V DC

Availability and lead time confirmed on request

Overview

MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4561 is a loop-powered 2–channel interface for use with conventional fire and smoke detectors located in hazardous areas. In operation, the triggering of a detector causes a corresponding change in the safe–area current. The unit features reverse input polarity protection, while ‘no-fail’ earth fault detection on either line can be provided by connecting an earth leakage detector to terminal 3 and/or 6.

Specification of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

See also common specification

Number of channels  Two, fully floating, loop powered

Location of fire and smoke detectors

Zone 0, IIC, T4–6 hazardous area if suitably certified

Div. 1, Group A, hazardous area

Input voltage  6 to 30V dc

Current range   1 to 40mA, nominal

Quiescent safe–area current at 20°c

(Hazardous–area terminals open circuit)

< 400µA at VIN = 24V per channel

Integral input polarity protection

Input circuit protected against reverse polarity

‘no-fail’ earth fault protection

Enabled by connecting terminals 3 and/or 6 to an earth leakage

Detector (see notes below)

Fault on either line of each channel proclaimed: unit continues

working

Minimum output voltage Vout at 20°c

For Vin ≤ 25V:  Vout = Vin – (0.38 x current in mA) – 2V

For Vin > 25V:  Vout = 22.5V – (0.35 x current in mA)

Maximum output voltage

28V from 300Ω

Transfer accuracy at 20°c

Better than 400µA

Temperature drift

<   4µA/°C ( 0°C to 60°C)

< 15µA/°C (–20°C to 0°C)

response time to step input

Settles to within 5% of final value within 1.5ms

Power dissipation within unit

0.7W maximum at 24V with 40mA signal (each channel)

0.9W maximum at 30V with 40mA signal (each channel)

PRODUCT LITERATURE of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

Product Code                      Description

intrinsically safe logo Symbol denotes that the equipment is suitable for use in hazardous area applications.

fsm logo Symbol denotes that the product has been assessed for functional safety applications.

SM45-55-AI SM45-55-AI is FSM FSM Safety Manual – Analogue Input Modules

SM45-55-AO SM45-55-AO is FSM FSM Safety Manual – Analogue Output Modules

SM45-55-BI SM45-55-BI is FSM FSM Safety Manual – Binary Input Modules

SM45-55-MMI SM45-55-MMI is FSM FSM Safety Manual – Machine Monitor Interfaces

SM45-55-SAD SM45-55-SAD is FSM FSM Safety Manual – Solenoid / Alarm Driver Modules

1. Intro of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

INA4500 MTL4500/4600 range Instructions for Safe Use

INM4500/4600 MTL4500/4600 range Instruction Manual

MTL4500-5500-ACC Backplanes, Enclosures & Accessories

MTL4500-5500-CS Common Specifications

MTL4500-5500-DS MTL4500-5500 range Data Set

2. Digital Input of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4501-SR MTL4501-SR is intrinsically safe MTL4501-SR is FSM 1ch DI failsafe solid-state output + LFD alarm

MTL4504 MTL4504 is intrinsically safe MTL4504 is FSM 1ch DI relay output + LFD alarm + phase reversal

MTL4510 MTL4510 is intrinsically safe 4ch DI solid-state output

MTL4510B MTL4510B is intrinsically safe 4ch DI multifunction solid-state output

MTL4511 MTL4511 is intrinsically safe MTL4511 is FSM 1ch DI relay output

MTL4513 MTL4513 is intrinsically safe 2ch DI solid-state output

MTL4514D MTL4514D is intrinsically safe MTL4514D is FSM 1ch switch/prox input, dual output relay

MTL4514_B MTL4514_B is intrinsically safe MTL4514_B is FSM 1ch DI relay output + LFD alarm

MTL4516 MTL4516 is intrinsically safe MTL4516 is FSM 2ch DI relay output

MTL4516C MTL4516C is intrinsically safe MTL4516C is FSM 2ch DI with changeover relay output

MTL4517 MTL4517 is intrinsically safe MTL4517 is FSM 2ch DI relay output + LFD alarm

3. Digital Output of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4521 MTL4521 is intrinsically safe MTL4521 is FSM Loop powered solenoid driver

MTL4521L MTL4521L is intrinsically safe MTL4521L is FSM loop powered solenoid driver IIC

MTL4523 MTL4523 is intrinsically safe MTL4523 is FSM Solenoid driver with LFD

MTL4523L MTL4523L is intrinsically safe MTL4523L is FSM Loop powered solenoid driver + LFD

MTL4523R MTL4523R is intrinsically safe MTL4523R is FSM Solenoid driver with LFD

MTL4523V-VL MTL4523V-VL is intrinsically safe MTL4523V-VL is FSM Solenoid/Alarm driver with voltage control

MTL4524 MTL4524 is intrinsically safe MTL4524 is FSM Switch operated solenoid driver

MTL4524S MTL4524S is intrinsically safe MTL4524S is FSM Switch operated solenoid driver, 24V override

MTL4525 MTL4525 is intrinsically safe MTL4525 is FSM Switch operated solenoid driver low power

MTL4526 MTL4526 is intrinsically safe 2ch switch operated relay

4. Analogue Input of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4541 MTL4541 is intrinsically safe MTL4541 is FSM 1ch 2/3 wire Transmitter repeater

MTL4541A MTL4541A is intrinsically safe 1ch Transmitter repeater, passive input

MTL4541AS MTL4541AS is intrinsically safe 1ch Transmitter repeater, passive input, current sink

MTL4541B MTL4541B is intrinsically safe MTL4541B is FSM MTL4041B replacement

MTL4541P MTL4541P is intrinsically safe MTL4041P replacement

MTL4541S MTL4541S is intrinsically safe MTL4541S is FSM 1ch 2/3 wire Transmitter repeater, current sink

MTL4541T MTL4541T is intrinsically safe 2/3 wire Transmitter repeater

MTL4544 MTL4544 is intrinsically safe MTL4544 is FSM 2ch 2/3 wire Transmitter repeater

MTL4544A MTL4544A is intrinsically safe 2ch Transmitter repeater, passive input

MTL4544AS MTL4544AS is intrinsically safe 2ch Transmitter repeater, passive input, current sink

MTL4544B MTL4544B is intrinsically safe MTL4044 replacement

MTL4544D MTL4544D is intrinsically safe MTL4544D is FSM 2/3 wire transmitter repeater, dual output

MTL4544S MTL4544S is intrinsically safe MTL4544S is FSM 2ch 2/3 transmitter repeater, current sink

5. Analogue Output of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4546 MTL4546 is intrinsically safe MTL4546 is FSM 1ch 4-20mA smart isolating driver + LFD

MTL4546C MTL4546C is intrinsically safe MTL4546C is FSM 1ch 4-20mA smart isolating driver + oc LFD

MTL4546S MTL4546S is intrinsically safe 1ch 4-20mA HART isolating driver + LFD

MTL4546Y MTL4546Y is intrinsically safe MTL4546Y is FSM 1ch 4-20mA smart isolating driver + oc LFD

MTL4549 MTL4549 is intrinsically safe MTL4549 is FSM 2ch 4-20mA smart isolating driver + LFD

MTL4549C MTL4549C is intrinsically safe MTL4549C is FSM 2ch 4-20mA smart isolating driver + oc LFD

MTL4549Y MTL4549Y is intrinsically safe MTL4549Y is FSM 2ch 4-20mA smart isolating driver + oc LFD

6. Temperature Input of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4573 MTL4573 is intrinsically safe 1ch Temperature converter, RTD / THC

MTL4575 MTL4575 is intrinsically safe 1ch Temperature converter, RTD / THC with alarm

MTL4576-RTD MTL4576-RTD is intrinsically safe 2ch Temperature converter, RTD

MTL4576-THC MTL4576-THC is intrinsically safe 2ch Temperature converter, THC

MTL4581 MTL4581 is intrinsically safe 1ch mV/THC isolator for low-level signals

MTL4582B MTL4582B is intrinsically safe MTL4582B is FSM 1ch resistance isolator to repeat RTD signals

7. Pulse and Vibration of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4531 MTL4531 is intrinsically safe MTL4531 is FSM 1ch vibration probe interface

MTL4532 MTL4532 is intrinsically safe 1ch pulse isolator, digital or analogue output

8. Fire and Smoke of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4561 MTL4561 is intrinsically safe MTL4561 is FSM 2ch loop-powered, for fire and smoke detectors

9. General of MTL4561 Fire and Smoke Detector Interface (2-Channel, Loop Powered)

MTL4599 Dummy isolator

MTL4599N General purpose feed-through module

available Q1 2014

MTL5015 2ch, solid-state output MTL5513 Common connection on haz side,

max frequency response 500Hz

MTL5016 2ch, n/o relay output MTL5516C

MTL5017 2ch, n/o relay output, LFD relay MTL5517 LFD relay energises on alarm

MTL5018 2ch, changeover relay output MTL5516C Common connection on haz side

MTL5018ac 2ch, changeover relay output, ac power

Continues as MTL5018ac.

Alternative option: MTL5516C fitted

with MPA5500 ac adaptor

MTL5021 Loop powered, IIC, (12.85V, 45mA, cl 45mA) MTL5521 (12.8V, 48mA, cl 48mA)

MTL5022 Loop powered, IIB, (12.9V, 60mA, cl 60mA) MTL5522 (9.9V, 70mA, cl 70mA)

MTL5023 Logic ctrl, lfd, phase,(12.85V, 45mA, cl 45mA) MTL5523 (12.8V, 48mA, cl 48mA)

MTL5024 Logic ctrl, phase, (12.85V, 45mA, cl 45mA) MTL5524 (12.8V, 48mA, cl 48mA)

MTL5025 Loop powered, IIC, (8.6V, 45mA, cl 45mA) MTL5525 (7V, 48mA, cl 48mA), lower Io

MTL5314 Trip amplifier

Continues as MTL5314 model

MTL5344 Repeater power supply

Discontinued

MTL5349 Isolating driver

Discontinued

MTL5991 24V power supply

Continues as MTL5991 model

MTL5995 Fieldbus power supply

Convert to F10X range product

Specifications

FunctionFire and smoke detector interface, loop powered
ChannelsTwo, fully floating
Detector locationZone 0, IIC, T4–6 (if suitably certified); Div. 1, Group A
Input voltage6–30 V DC
Current range1–40 mA nominal
Response timeSettles within 5 % of final value within 1.5 ms
Functional safetySIL 2 capable (single device)

Source: MTL (Eaton) data sheet MTLx561. Confirm with the manufacturer datasheet before ordering.

Documents

  • DatasheetPDF · on request Request
  • Operating manualPDF · on request Request
  • Certificate copy (with order, where available)PDF · on request Request

Downloads will be added after the files have been checked.