Safety Barriers

Pepperl+Fuchs KFD2-SCD2-Ex2.LK SMART Current Driver, 2-Channel Isolated Barrier

Pepperl+Fuchs Safety Barriers

Pepperl+Fuchs KFD2-SCD2-Ex2.LK SMART Current Driver

ModelKFD2-SCD2-Ex2.LK

SMART current driver, 2-channel isolated barrier for I/P converters and valve positioners. Input: 4–20 mA (control side), limited to approx. 30 mA; output: 4–20 mA, load 100–650 Ω.

Input
4–20 mA (control side), limited to approx. 30 mA
Output
4–20 mA, load 100–650 Ω
Line fault detection
Lead breakage and short circuit
Supply
19–30 V DC via Power Rail or terminals 14+, 15-

Availability and lead time confirmed on request

Overview

Pepperl+Fuchs KFD2-SCD2-Ex2.LK SMART Current Driver, 2-Channel Isolated Barrier

Description of Pepperl+Fuchs KFD2-SCD2-Ex2.LK SMART Current Driver, 2-Channel Isolated Barrier 

  • Smart current driver – 20mm

  • This isolated barrier is used for intrinsic safety applications. It drives SMART I/P converters, electrical valves, and positioners in hazardous areas.

  • Digital signals are superimposed on the analog values at the field or control side and are transferred bi-directionally.

  • Current transferred across the DC/DC converter is repeated at terminals 1, 2 and 4, 5.

  • An open and shorted field circuit presents a high input impedance to the control side to allow line fault detection by control system.

  • If the loop resistance for the digital communication is too low, an internal resistor of 250Ω between terminals 8, 9 and 11, 12 is available, which may be used as the HART communication resistor.

  • Sockets for the connection of a HART communicator are integrated into the terminals of the device.

  • A unique collective error messaging feature is available when used with the Power Rail system.

Technical specification of Pepperl+Fuchs KFD2-SCD2-Ex2.LK SMART Current Driver, 2-Channel Isolated Barrier 

Supply voltage: 10-35V d.c.

Power consumption: 1.8W at 20mA

Input/Output: Analogue output

No. of Channels: 2

Output:

 Current: 4-20mA

 Load: 100-700Ω

 Voltage: ≥14V at 20mA

Input:

 Voltage drop: Approx. 4V or internal resistance 200Ω at 20mA

 Input resistance: >100kΩ when wiring resistance in the field

<50Ω or >16V (equivalent to 800Ω at 20mA

 Current: 4-20mA limited to approx. 25mA

(or the output current if less)

Ambient temperature: -20 to +60°C

Protection rating: IP20

Mounting: 35mm DIN rail or panel mount

Dimensions: w20 x h124 x d115mm

Features

  • SMART Current Driver KFD2-SCD2-Ex2.LK

  • 2-channel isolated barrier

  • 24 V DC supply (Power Rail)

  • Current output up to 700 AZ© load

  • HART I/P and valve positioner

  • Line fault detection (LFD)

  • Accuracy 0.05 %

  • Terminal blocks with test sockets

  • Up to SIL2 acc. to IEC 61508

Specifications

FunctionSMART current driver, 2-channel isolated barrier for I/P converters and valve positioners
Input4–20 mA (control side), limited to approx. 30 mA
Output4–20 mA, load 100–650 Ω
Line fault detectionLead breakage and short circuit
Supply19–30 V DC via Power Rail or terminals 14+, 15-
Accuracy< 0.1 % of full scale
Functional safetySIL 2 (SC 3)
Ambient temperature-40 to 70 °C
Ex certificateBAS 00 ATEX 7240 X

Source: Pepperl+Fuchs product page and data sheet KFD2-SCD2-Ex2.LK. Confirm with the manufacturer datasheet before ordering.

Documents

  • DatasheetPDF · on request Request
  • Operating manualPDF · on request Request
  • Certificate copy (with order, where available)PDF · on request Request

Downloads will be added after the files have been checked.